Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Baseline of 202 WHP on Dyno Dynamics

Thread Tools
 
Search this Thread
 
Old Jun 13, 2003 | 03:55 PM
  #1  
Twell's Avatar
Thread Starter
Newbie
 
Joined: Apr 2003
Posts: 20
Likes: 0
Baseline of 202 WHP on Dyno Dynamics

I recently went to Vishnu Tuning place and had a Stage 0 installed we first ran baseline on my car which is stock and was running 91 octane. My car ran a consistant 202 which was 1 hp more than the SSC magazine car... Go figure. They were pretty happy to see an off the lot car run the same as a mag car. Needless to say I was happy
Reply
Old Jun 13, 2003 | 03:57 PM
  #2  
Twell's Avatar
Thread Starter
Newbie
 
Joined: Apr 2003
Posts: 20
Likes: 0
If anyone is considering the Vishnu Stage 0, I can tell you I love it. More than just HP numbers the powerband is fantastic... Shiv does a great job smoothing out the lumps and extending the powerband. I got lucky with my car. With 91 octane he was able to gain 20 WHP. But even more pleasing is the power we all feel from 3000 to say 5000 is now 3000 to 7000.. And with a 93octane blend (91 plus 3 gallons of 101) it starts scrambling for traction off the line without any launch tactics
Reply
Old Jun 13, 2003 | 03:58 PM
  #3  
KK's Avatar
KK
EvoM Administrator
iTrader: (4)
 
Joined: Jun 2001
Posts: 1,393
Likes: 0
From: Cali
That's awesome! What were your Stage 0 results afterwards? Can you also check and see what your build date is? Is should be on the drivers side door jam area.

Mark
Reply
Old Jun 13, 2003 | 04:01 PM
  #4  
Twell's Avatar
Thread Starter
Newbie
 
Joined: Apr 2003
Posts: 20
Likes: 0
220.5 on 91 octane. My billed date is February
Reply
Old Jun 13, 2003 | 04:02 PM
  #5  
ez76's Avatar
Evolved Member
iTrader: (5)
 
Joined: Apr 2003
Posts: 1,332
Likes: 0
From: bay area
Awesome. Yet another satisfied Vishnu customer.
Reply
Old Jun 13, 2003 | 04:04 PM
  #6  
KK's Avatar
KK
EvoM Administrator
iTrader: (4)
 
Joined: Jun 2001
Posts: 1,393
Likes: 0
From: Cali
Same build as me... lucky dog

I agree about the powerband w/ the XEDE... it's a very overlooked aspect for smooth delivery of power.

Mark
Reply
Old Jun 13, 2003 | 04:04 PM
  #7  
Twell's Avatar
Thread Starter
Newbie
 
Joined: Apr 2003
Posts: 20
Likes: 0
I had about 2,700 miles when I pulled up to him.. Only thing I can think of is I used a secret sauce to break in the motor..
Reply
Old Jun 13, 2003 | 04:09 PM
  #8  
ez76's Avatar
Evolved Member
iTrader: (5)
 
Joined: Apr 2003
Posts: 1,332
Likes: 0
From: bay area
Did you keep to the strict break-in procedure (no revs > 5000rpm before 600mi) or what did you do? Inquiring minds ...
Reply
Old Jun 13, 2003 | 06:17 PM
  #9  
Twell's Avatar
Thread Starter
Newbie
 
Joined: Apr 2003
Posts: 20
Likes: 0
Regarding Break-in I took it fairly easy for the first 350 miles and then occasionally ran it to 7000. At 525 I changed to conventional oil............ at 1950 miles (or approximately 1500 miles of moderate to hard break-in driving) I changed back to Synthetic. Im using about one quart per 2250-2500 miles which im told is pretty good.
Reply
Old Jun 15, 2003 | 07:06 PM
  #10  
EVOLUTIONIZE's Avatar
Evolving Member
 
Joined: May 2003
Posts: 168
Likes: 0
From: Miami
IS FEB a good production Date?


Laterz
Reply
Old Jun 16, 2003 | 12:22 AM
  #11  
weightless's Avatar
Evolving Member
iTrader: (6)
 
Joined: May 2003
Posts: 104
Likes: 0
btw how do I find out the build date of my evo?
Reply
Old Jun 16, 2003 | 12:29 AM
  #12  
zx6r's Avatar
Evolving Member
 
Joined: Apr 2003
Posts: 202
Likes: 0
From: OC
Originally posted by weightless
btw how do I find out the build date of my evo?
As mentioned by KK above, it's on the drivers door jam. As you look down theres a sticker right at the bottom facing towards you. On this sticker towards the top is the build date ( month and year only )
Reply
Old Jun 16, 2003 | 09:00 AM
  #13  
weightless's Avatar
Evolving Member
iTrader: (6)
 
Joined: May 2003
Posts: 104
Likes: 0
sorry, I was doing my late night quick browsing and missed what KK wrote above. thanks.
Reply




All times are GMT -7. The time now is 08:59 AM.