Here are some pics of Paul's new setup. We are given the new Aeromotive pump a try. This one is rated for 120psi and should flow what we need at 70-80psi. We still have the full Blow top with 10an out and it runs to the Aeromotive fuel filter (100micron) and then the pump. After the pump it splits into twin -6 that feed each side of the rail with the return out the middle. We have it setup on the Aeromotive speed controller which gives voltage with RPM and then we have the AEM wired into the over ride to kick the pump on full blast at 10psi no matter what the RPM. So kinda like a fail safe.

Those who really know there EVO will notice something else in the pics

 

Nice looking fuel system! I hope it can do the job and if I can find the time on Thurs I will definitely drop by HP Freaks to see how your dyno session is going!

 

i only see half a saddle tank....

 

Looks awesome Lucas Should be enough fuel for us!

 

nice fuel set-up....

 

Got anypictures from the tank? Or teh engine side?

 

very nice

 

My poor fuel tank