Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Nisei or ETS Intercooler...?

Thread Tools
 
Search this Thread
 
Old Aug 16, 2007 | 09:40 AM
  #31  
EVIL MR's Avatar
Evolved Member
20 Year Member
iTrader: (5)
 
Joined: Jul 2004
Posts: 974
Likes: 0
From: ORLANDO
If I had to do it again I will get Nisei.
Reply
Old Aug 16, 2007 | 09:41 AM
  #32  
Turbo Meg's Avatar
Evolved Member
iTrader: (5)
 
Joined: Jan 2005
Posts: 567
Likes: 0
From: Rochester NH
Originally Posted by Evo23IG
By the way, Carlos was running a street core which Nisei doesn't even sell. If you want to I can post my graphs and if you like come to NYC and I will give you a ride in my, I HAD no loss of spool and boost after I installed Nisei Comp Intercooler.

Dude I was born in NYC, work on LI currently, and I am sure you car is awesome. I just want to offer another side. In the end we are all trying to help the OP make the best choice for his car. I am glad you are happy with your intercooler. I might just take you up on that ride sometime.
Reply
Old Aug 16, 2007 | 09:50 AM
  #33  
Turbo Meg's Avatar
Evolved Member
iTrader: (5)
 
Joined: Jan 2005
Posts: 567
Likes: 0
From: Rochester NH
Originally Posted by BostonEvo
if you only saw gains of 3-8whp with a IC , new MANIFOLD , Meth , and a retune. Your car must be retarded. Or your tuner must be on crack. Cuz that is the worst gain for those mods i have ever heard of.
THIS IS NOT MY CAR!!!!!! Learn to read correctly.

Last edited by Turbo Meg; Aug 16, 2007 at 09:52 AM.
Reply
Old Aug 16, 2007 | 10:16 AM
  #34  
~EVILEVO~'s Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: May 2005
Posts: 605
Likes: 0
From: Arizona
hmmm so both seem to be good choices? i guess i just need to flip a coin dosent sound like i could go wrong....either way.
Reply
Old Aug 16, 2007 | 10:27 AM
  #35  
Spooldyou's Avatar
Evolved Member
15 Year Member
iTrader: (52)
 
Joined: Sep 2005
Posts: 1,522
Likes: 0
From: Boston,MA
No way Neise....... or however you spell it........ Is hands down the best intercooler on the market.... Do your research. The most amazing Intercooler i have ever owned...


My neisi On my EVO.


Reply
Old Aug 16, 2007 | 10:29 AM
  #36  
Evo23IG's Avatar
Evolved Member
iTrader: (36)
 
Joined: Mar 2004
Posts: 720
Likes: 0
To be honest, you can't go wrong with either. Both companies make very nice quality parts. I think in the end its more of a money factor. I also not noticed somebody point out that ETS is american, so is Nisei, its made here in america.
Reply
Old Aug 16, 2007 | 10:29 AM
  #37  
CoachG's Avatar
Evolved Member
iTrader: (4)
 
Joined: Feb 2004
Posts: 524
Likes: 3
From: Central NJ
I'm currently sporting major wood for the new stock turbo Full Race vertical IC kit. It also leaves the door open to a twin scroll turbo upgrade in the future. They state it will support 775hp and help with spool due to the shorter pipe lengths. It still retains AC, PS, airbox, and stock size battery.

Sweet but pricey.
Reply
Old Aug 16, 2007 | 10:30 AM
  #38  
Evo23IG's Avatar
Evolved Member
iTrader: (36)
 
Joined: Mar 2004
Posts: 720
Likes: 0
Originally Posted by Turbo Meg
Dude I was born in NYC, work on LI currently, and I am sure you car is awesome. I just want to offer another side. In the end we are all trying to help the OP make the best choice for his car. I am glad you are happy with your intercooler. I might just take you up on that ride sometime.
Let me know, I have no problem with giving you a ride. It seems you got some nice mods too, I would not mind taking a ride on yours too, lol.
Reply
Old Aug 16, 2007 | 10:31 AM
  #39  
Spooldyou's Avatar
Evolved Member
15 Year Member
iTrader: (52)
 
Joined: Sep 2005
Posts: 1,522
Likes: 0
From: Boston,MA
Originally Posted by BostonEvo
if you only saw gains of 3-8whp with a IC , new MANIFOLD , Meth , and a retune. Your car must be retarded. Or your tuner must be on crack. Cuz that is the worst gain for those mods i have ever heard of.
Chill it out NEWB..... And its not HIS car.....


First off your not going to see immedate gains with an intercooler anyways. Its all about efficency and its ablity to deal with heat soak. You can do a few runs on the stock IC and be heat soaked to no end. I would strongly suggest reading through the test that Nesi has done...


It seems like once a year they come out with a new intercooler that absolutely Blows the competiion away in every aspect. I hope they keep up the amazing work.
Reply
Old Aug 16, 2007 | 10:43 AM
  #40  
AutoMotoSports's Avatar
Former Sponsor
iTrader: (42)
 
Joined: Oct 2003
Posts: 6,132
Likes: 3
From: West Chicago, IL
Originally Posted by BostonEvo
My buddy had the Neisi Core on his Stock tubed Evo8 , The spool was the same.

Please dont post "myths" about what you might have heard. Only hard Data , or first hand experance's. That will make "Evilevo's" desion a little easyer. I personally like the Niesi because they have backed up there product with testing that proves its amazing , and have been around a little bit longer then the ets. Both are good products though. I have never heard bad things about either.


http://www.nisei-evo.com/forum/viewtopic.php?t=26 nisei VS AMS
http://www.nisei-evo.com/forum/viewtopic.php?t=25 nisei VS Bushur

Those Nisei tests on our core and buschurs have been proven to be horribly inacurate. The conditions were not even close to the same, temp, boost.. it was very biased and should not be used a test.

do a search for it on here an you will uncover the truth about it.

Eric
Reply
Old Aug 16, 2007 | 10:54 AM
  #41  
Soon2BEVO's Avatar
Evolved Member
iTrader: (41)
 
Joined: Sep 2004
Posts: 4,653
Likes: 0
From: Toms River, NJ
You are going to get gains by going with ETS, Buschur, Nisei, or AMS. They are all much better than the stock intercooler and the differences between them will most likely be so negligible you will not feel or see them. Just buy the one you like for price and looks, because they all work great.
Reply
Old Aug 16, 2007 | 11:02 AM
  #42  
Pd1's Avatar
Pd1
Evolved Member
iTrader: (38)
 
Joined: Aug 2005
Posts: 555
Likes: 0
From: NorCal
They're both quality products. However, it's worth mentioning that the ETS street unit requires no cutting of the undertray whatsoever.
Reply
Old Aug 16, 2007 | 11:22 AM
  #43  
Evo23IG's Avatar
Evolved Member
iTrader: (36)
 
Joined: Mar 2004
Posts: 720
Likes: 0
Originally Posted by Pd1
They're both quality products. However, it's worth mentioning that the ETS street unit requires no cutting of the undertray whatsoever.
Thats very true, for Nisei you have to cut the undertray or buy the Beatbrush undertray like I did. But the cutting is very minimal and its easy.
Reply
Old Aug 16, 2007 | 11:24 AM
  #44  
uglyevo's Avatar
Evolving Member
iTrader: (8)
 
Joined: Aug 2006
Posts: 222
Likes: 0
From: Alaska
here is what my ETS 3.5" looks like

Reply
Old Aug 16, 2007 | 11:39 AM
  #45  
Thegame's Avatar
Evolved Member
iTrader: (26)
 
Joined: Aug 2004
Posts: 2,426
Likes: 0
From: Pittsburgh, PA
I have to say that based on looks alone, the ETS is by far the meanest looking! It fills the entire bumper! Sticking with the stock turbo, just go with the ETS 3". It's plenty large for the stock turbo and still large enough for an Evo Green or 30R. That saves you some money that you really don't have to spend.
Reply



All times are GMT -7. The time now is 09:03 PM.