OK so i was messing around and took my Stock Bov out just to look it over and i took it out and then put it back in. So now when i spool up the turbo and let off the gas it bounces it was 100% fine before i took it out and i dident stick anything in it or touch the valve. Just wanted to look in it. It usto make a Slight Woosh in the intake and now i can here it making a WOoSH WOosh woosh... What is going on do i need a new bov and will this damage the motor? it ideals fine at 800 rpm. any info will help

 

Does it hold boost better? - backwards

If it bounces and doesnt hold then the line might be off

 

all the lines are on it snug and no kinks. i guess ill try switching it around!

As for holding boost i dont feel much of a diff, but it might have been better before i took it off when i was driving last night it was holding 100% fine

 

I just don tknow what would make it start doing that out of no where,

 

Those valves are tough to break, maybe something loose, stuck in there, or hooked up wrong - no biggy, just have to find out where it's at

 

Make sure its not in backwards. The bottom of the valve goes to the Upper intercooler pipe.

 

i Took it back out and fixed it some how the valve got "sticky" it wouldent open and close all the way so i added a light amount of Motor Oil to it and it works again! Seems to make a little more Woosh Sound now can here it coming out of my intake haha just add a drop of oil to the silver rod

 

Im thinking about doing the Bov Mod for the stock bov
here is the link think i should try it? I can always buy my friends Rs Bov from him if i mess up.


https://www.evolutionm.net/forums/sh...d.php?t=101867