HTA GT35R Dyno results right here!
Thread Starter
Evolved Member
iTrader: (8)
Joined: Jul 2003
Posts: 669
Likes: 0
From: Nashville Metro
HTA GT35R Dyno results right here!
Well folks I have to say that this turbo is the $hit. It did better than I expected. As you can see on the dyno sheets, it was done on a dyno dynamic dyno. So if it where on a DynoJet, I may have gotten around 485+/- 5HP. And yes on 21.5 psi.
Thanks to Andrew and Bruce at Dyno4mance for fighting with the MAFT Pro box with a touch of ECU flash to smooth things out. Andrew said I made the most HP on pump gas ever on his Dyno.
and now the ****.
Video to follow!
Thanks to Andrew and Bruce at Dyno4mance for fighting with the MAFT Pro box with a touch of ECU flash to smooth things out. Andrew said I made the most HP on pump gas ever on his Dyno.
and now the ****.
Video to follow!
Last edited by LT1runner; Oct 6, 2007 at 02:21 PM.
The pics are there, try quoting him and coping the link directly. They are done correctly, but not coming up for some reason.
And that is some nice power, especially at that boost level. Very nice. Is this on the Buschur Kit?
And that is some nice power, especially at that boost level. Very nice. Is this on the Buschur Kit?
Trending Topics
Thread Starter
Evolved Member
iTrader: (8)
Joined: Jul 2003
Posts: 669
Likes: 0
From: Nashville Metro
Here you go. Sorry fellas. Where is a good place to uplaod videos? I want to post my vid of the dyno.
http://good-times.webshots.com/photo...38095062PwuDLH
http://good-times.webshots.com/photo...38095062rvgNyx
http://good-times.webshots.com/photo...38095062PwuDLH
http://good-times.webshots.com/photo...38095062rvgNyx
Thread Starter
Evolved Member
iTrader: (8)
Joined: Jul 2003
Posts: 669
Likes: 0
From: Nashville Metro
I'd also like to thank Robert at Forced Performance for making a kick *** turbo. Buschur for the race intercooler, and the COP. AMS for the kit to begin with. MAFT guys. Lastly FIC for the 1000cc inj. And thomas Lewis for putting this thing together.
I ran out of time to do a meth tune. I'll do that in 2 weeks. Just have too much stuff to do. Hell I'm still trying to bring my Z28 back to life.
I ran out of time to do a meth tune. I'll do that in 2 weeks. Just have too much stuff to do. Hell I'm still trying to bring my Z28 back to life.
Thread Starter
Evolved Member
iTrader: (8)
Joined: Jul 2003
Posts: 669
Likes: 0
From: Nashville Metro
From the openning post: So if it where on a DynoJet, I may have gotten around 485+/- 5HP. And yes on 21.5 psi.
2.3ltr @21psi on 93 oct. This result may not be good enough for you, but it's a good start for me. Andrew dyno reads alittle low, so I'm told, so if that disappointed you, then oh well. It's went higher than a 37R car(on 93oct). Higher than any other 35R car that has ran on this dyno(on 93oct).
2.3ltr @21psi on 93 oct. This result may not be good enough for you, but it's a good start for me. Andrew dyno reads alittle low, so I'm told, so if that disappointed you, then oh well. It's went higher than a 37R car(on 93oct). Higher than any other 35R car that has ran on this dyno(on 93oct).
Thread Starter
Evolved Member
iTrader: (8)
Joined: Jul 2003
Posts: 669
Likes: 0
From: Nashville Metro
Thanks man. Dyno4mance isa great place to take any car!
