Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Going for 900whp this Week!!! Pics Inside!!!

Thread Tools
 
Search this Thread
 
Old Dec 2, 2007 | 10:38 PM
  #196  
MANGOOK's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2003
Posts: 900
Likes: 0
From: Boca Raton, FL
Mike good luck reaching your goal! I hope you reach it. Also all of USP is in this thread. What's up Chris Green and CWill?
Reply
Old Dec 3, 2007 | 05:10 AM
  #197  
crcain's Avatar
Evolved Member
 
Joined: Oct 2002
Posts: 2,788
Likes: 1
Originally Posted by 03whitegsr
... about the GT35R only spooling 500 slower and this turbo not making the power, you should realize that a well setup GT4294R will get to 30 psi around 5500 RPM too.
It appears you know what your talking about, so I appreciate that. But I'm sorry in 4th gear Dave Buschur said 30 psi for a 35R on a 2 litre is about 5200 rpm.

So now your saying a GT42 spools 300 rpm later!

I think I give up in talking to people about lag. 95% of the people saying this and that have never looked at a datalog in their life. I give up.
Reply
Old Dec 3, 2007 | 05:19 AM
  #198  
JVELA's Avatar
Evolving Member
iTrader: (1)
 
Joined: Nov 2003
Posts: 345
Likes: 0
From: PR
I doubt that you can see full boost(40psi) on a s372 before 6500 rpm. Not to say 7000!!!

Last edited by JVELA; Dec 3, 2007 at 07:02 AM.
Reply
Old Dec 3, 2007 | 05:56 AM
  #199  
Jasil's Avatar
Evolved Member
iTrader: (22)
 
Joined: May 2005
Posts: 2,327
Likes: 1
From: NO
^^^^^^
Agreed.
Reply
Old Dec 3, 2007 | 07:56 AM
  #200  
alpha's Avatar
Evolving Member
iTrader: (3)
 
Joined: May 2005
Posts: 304
Likes: 0
From: Florida
Typically see 30lbs with a GT4294R on a 2.0 by 5800RPM and 40lbs by 6600RPM with a divided Full-Race exhaust manifold and 4" downpipe
Reply
Old Dec 3, 2007 | 08:24 AM
  #201  
crcain's Avatar
Evolved Member
 
Joined: Oct 2002
Posts: 2,788
Likes: 1
Originally Posted by alpha
Typically see 30lbs with a GT4294R on a 2.0 by 5800RPM and 40lbs by 6600RPM with a divided Full-Race exhaust manifold and 4" downpipe
That is impressive. What gear is that in?

Might I ask what you think a 37R sees 30 psi then?
Reply
Old Dec 3, 2007 | 08:39 AM
  #202  
nos51's Avatar
Account Disabled
iTrader: (30)
 
Joined: Feb 2007
Posts: 488
Likes: 0
From: miami
Originally Posted by USP Motorsports
well it doesnt make 900 on 28 psi.. so i am sure when i on 45psi it will be over 1000rpm later spool than a 35r.. however if the powerband carries to redline and doesnt drop off like a 35r ill sacrifice the 1000rpm of course..

In my experience with making a car go fast its not peak WHP its the entire band.. My old setup had 3000 rpm of 650+whp powerband.. a car that makes 650whp from 8000-8500rpm goes nowhere.. trust me i have raced cars making the exact same power as mine but my band was 3000rpm on 37r and theirs 500rpm on a 40r and i put a bus length on them..
yea i can vouch for that......
Reply
Old Dec 3, 2007 | 08:48 AM
  #203  
alpha's Avatar
Evolving Member
iTrader: (3)
 
Joined: May 2005
Posts: 304
Likes: 0
From: Florida
Originally Posted by crcain
That is impressive. What gear is that in?

Might I ask what you think a 37R sees 30 psi then?
That's in fourth gear

I dont have logs of our T3/T67 P trim (37R) on this laptop. I will check the other laptop in a little while for you (leaving for a remote tune). Difference is it's open turbine inlet and on a 3" downpipe
Reply
Old Dec 3, 2007 | 08:07 PM
  #204  
AWD Motorsports's Avatar
Thread Starter
Former Sponsor
iTrader: (211)
 
Joined: Jun 2007
Posts: 9,665
Likes: 1
From: South Florida
so far 750whp and ripping loose on the dyno.. Im on MH DOT's and tried 3 different air pressure and 3rd and 4th gear pulls.. going to switch to a street tire and make more pulls..boost is coming in violent.. i have in car video of boost gauge and tach.. stay tuned..
Reply
Old Dec 3, 2007 | 08:15 PM
  #205  
Paul Nelson's Avatar
Evolved Member
iTrader: (1)
 
Joined: Jul 2005
Posts: 3,249
Likes: 0
From: Team English Racing
Originally Posted by USP Motorsports
so far 750whp and ripping loose on the dyno.. Im on MH DOT's and tried 3 different air pressure and 3rd and 4th gear pulls.. going to switch to a street tire and make more pulls..boost is coming in violent.. i have in car video of boost gauge and tach.. stay tuned..
I did 8 straps on mine wand just reef the hell out of them
Reply
Old Dec 3, 2007 | 08:37 PM
  #206  
CWiLL's Avatar
Former Sponsor
iTrader: (9)
 
Joined: Aug 2007
Posts: 387
Likes: 0
From: FL
we def getting 47psi before 7000rpm try early 6s lol what a monster. we put my stock evo wheels on the car now, here we go, 50 + soon
Reply
Old Dec 3, 2007 | 08:41 PM
  #207  
scheides's Avatar
EvoM Moderator
iTrader: (10)
 
Joined: Oct 2006
Posts: 4,827
Likes: 13
From: Minneapolis
Originally Posted by USP Motorsports
so far 750whp and ripping loose on the dyno.. Im on MH DOT's and tried 3 different air pressure and 3rd and 4th gear pulls.. going to switch to a street tire and make more pulls..boost is coming in violent.. i have in car video of boost gauge and tach.. stay tuned..
Dropp the pressure in the tires really low, to like 5psi. strap it down SUPER tight, then pump pressure back into the tires. This should help!
Reply
Old Dec 3, 2007 | 08:43 PM
  #208  
CWiLL's Avatar
Former Sponsor
iTrader: (9)
 
Joined: Aug 2007
Posts: 387
Likes: 0
From: FL
Originally Posted by scheides
Dropp the pressure in the tires really low, to like 5psi. strap it down SUPER tight, then pump pressure back into the tires. This should help!
we hazed the tires bad. the slick now
Reply
Old Dec 3, 2007 | 09:05 PM
  #209  
Paul Nelson's Avatar
Evolved Member
iTrader: (1)
 
Joined: Jul 2005
Posts: 3,249
Likes: 0
From: Team English Racing
Originally Posted by CWiLL
we hazed the tires bad. the slick now
Dam stop spraying that NOS!
Reply
Old Dec 3, 2007 | 09:56 PM
  #210  
CWiLL's Avatar
Former Sponsor
iTrader: (9)
 
Joined: Aug 2007
Posts: 387
Likes: 0
From: FL
Originally Posted by ifarted2
Dam stop spraying that NOS!
thats what it seems like the min it hits over 40psi its rips the slicks like a fwd car. its bad. were working on it as we speak
Reply



All times are GMT -7. The time now is 07:41 AM.