Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Just received my Evo Green!

Thread Tools
 
Search this Thread
 
Old Jan 3, 2008 | 12:47 PM
  #1  
recompile's Avatar
Thread Starter
Evolved Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 1,745
Likes: 10
From: New Hampshire, USA
Just received my Evo Green!







Paid $1650 shipped, brand new, from Extreme PSI. Ordered on 12/28 with free ground shipping, and received it today (it shipped out immediately).

Looking forward to sending the hotisde out for PPI port & coat, as well as installing my clutch, flywheel, ported/coated ex. manifold & O2 housing, and Forge WGA.

Lofty goals... I want to make 400whp on a Mustang. Not sure if I'll be able to do it with pump or without cams, but we'll see.

Last edited by recompile; Jan 3, 2008 at 12:52 PM.
Reply
Old Jan 3, 2008 | 12:51 PM
  #2  
MyEvoDream's Avatar
Evolved Member
iTrader: (7)
 
Joined: Dec 2006
Posts: 1,096
Likes: 0
From: boston
nice shameless keep us posted
Reply
Old Jan 3, 2008 | 12:58 PM
  #3  
zbomb's Avatar
Evolved Member
iTrader: (48)
 
Joined: Nov 2004
Posts: 1,664
Likes: 1
From: Mass
Cool, Where's the closest Mustang in the area?
Reply
Old Jan 3, 2008 | 12:59 PM
  #4  
Spoolin18's Avatar
Evolving Member
iTrader: (9)
 
Joined: Jan 2007
Posts: 192
Likes: 0
From: Maryland
400whp on a Mustang dyno without cams, on pump gas alone, def. is not feesable.
Reply
Old Jan 3, 2008 | 01:02 PM
  #5  
Mad_SB's Avatar
Evolved Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 2,138
Likes: 0
From: Georgia
^^
you beat me to it. It's possible, but only if they are fudging numbers. That is without cams or just on pump gas. Then again, I'm used to our dynodynamics heart breaker.
Reply
Old Jan 3, 2008 | 01:02 PM
  #6  
recompile's Avatar
Thread Starter
Evolved Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 1,745
Likes: 10
From: New Hampshire, USA
Originally Posted by zbomb
Cool, Where's the closest Mustang in the area?
ESP in Sterline ( www.enhancedstreetperformance.com )
Reply
Old Jan 3, 2008 | 01:03 PM
  #7  
Mad_SB's Avatar
Evolved Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 2,138
Likes: 0
From: Georgia
When did fp start putting ID plates on the compressor cover??????
Reply
Old Jan 3, 2008 | 01:05 PM
  #8  
recompile's Avatar
Thread Starter
Evolved Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 1,745
Likes: 10
From: New Hampshire, USA
Originally Posted by Spoolin18
400whp on a Mustang dyno without cams, on pump gas alone, def. is not feesable.
You may be right, but most would think that 12.0 AFR, 27psi, and 6° > 16° of timing on pump gas is not feesable either, but I've run my stock turbo that way without a problem and with zero knock (Shell 93 for the win).

I'm going to find out exactly where I stand with stock turbo, stock manifold, stock turbing housing, stock O2 housing, and stock WGA

Then I'm gonna swap the turbos and all the other parts above, re-tune, and head back to the same dyno within a matter of days so I'll have a good comparison.
Reply
Old Jan 3, 2008 | 01:09 PM
  #9  
06MREvo's Avatar
Evolved Member
iTrader: (90)
 
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
I'm going to guess you hit somewhere around 360whp on a MD with the mods you have currently and installing, with no cams and pump gas, depending on the tuner.
Reply
Old Jan 3, 2008 | 01:26 PM
  #10  
sliqdaddy91's Avatar
Evolving Member
iTrader: (2)
 
Joined: Feb 2006
Posts: 434
Likes: 1
From: Detroit Michigan
fpgreen and cams FTW...i hope to hit 400whp with that turbo and the list of mods below on pump!

Good luck!
Reply
Old Jan 3, 2008 | 01:31 PM
  #11  
MR Turco's Avatar
EvoM Staff Alumni
iTrader: (16)
 
Joined: May 2007
Posts: 3,233
Likes: 3
From: Massachusetts
Shameless i think we are going to try to plan a dyno day at esp next spring/summer. Let me know if you need a hand with the install.
Reply
Old Jan 3, 2008 | 01:38 PM
  #12  
mdsevo06's Avatar
Evolved Member
iTrader: (41)
 
Joined: Jan 2006
Posts: 1,432
Likes: 1
From: San Diego
Can't you just send in your stock IX Turbo to FP for $650, and they'll make it a Green?
Reply
Old Jan 3, 2008 | 01:41 PM
  #13  
MR Turco's Avatar
EvoM Staff Alumni
iTrader: (16)
 
Joined: May 2007
Posts: 3,233
Likes: 3
From: Massachusetts
Originally Posted by mdsevo06
Can't you just send in your stock IX Turbo to FP for $650, and they'll make it a Green?
I think it is closer to a $1000. but yeah from what i have read you can.
Reply
Old Jan 3, 2008 | 01:58 PM
  #14  
mdsevo06's Avatar
Evolved Member
iTrader: (41)
 
Joined: Jan 2006
Posts: 1,432
Likes: 1
From: San Diego
The $650 estimate came from the Buschur camp. I'm just wondering what would be the benifit of ordering a new one for $1650, instead of saving a thousand, if there identical?
Reply
Old Jan 3, 2008 | 02:07 PM
  #15  
scheides's Avatar
EvoM Moderator
iTrader: (10)
 
Joined: Oct 2006
Posts: 4,827
Likes: 13
From: Minneapolis
Sexy turbo man! Is that hotside ported, or just nice and shiny?
Reply



All times are GMT -7. The time now is 01:04 AM.