Hey guys been doing allot of reading and wanted to get some strong evidence on what is the best camshaft for making over 800whp. I heard from a source that the JUN cams are very similar to the BR272 but i dont know for sure. We have seen allot of camshaft posts but i dont believe we have seen any regarding the three in question. So with that lets keep this thread informative and see if we can find what cam is going to be best for the higher HP cars.

GSC S2
Buschur BR272
JUN 272

Chris

 

I was running the GSC S2.Before that i had the BC280s. we did the 1.01 housing swap to the 1.28 housing and cams together and gained 70whp with the same tune. If that helps a little. I haven't tried the JUNS or DB 272. Ive heard there about the same specs.

 

the br cams are outstanding. my buddy has em in his 8 and wow you could tell a huge difference after he put em in.

 

BF272's!!

 

BF272 vs S2 power? Who wins?

BF272 vs S2 Idle? Who wins?

Stock ECU on both. I have read of people using the stock ECU for both. Sound clips would be great!

To be honest at this level of mods I am not looking for a "good" idle if the car doesn't stall all over the place that is good enough for me. I don't even care if they have to idle at 1,300 rpm as long as the car doesn't stall that is a good idle.

 

Depends on your valve train as well, Greg from GSC told me for me (in my case with BC Ti Retainers and Springs) I needed to shim the springs to a certain number.

 

bah.....

 

???