Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Dyno Tuned

Thread Tools
 
Search this Thread
 
Old Jan 14, 2008 | 03:40 AM
  #1  
markymark1082's Avatar
Thread Starter
Evolved Member
iTrader: (4)
 
Joined: Dec 2006
Posts: 520
Likes: 0
From: San Antonio, TX
Dyno Tuned

I just dynoed for the first time and was pretty upset. I put down 305 hp 319 tq. I was hoping for a little more whp than what I put down with my mods. Let me know what you think.

Here is the video of it.

My 2003 Evo VIII being tuned on the dyno
Reply
Old Jan 14, 2008 | 03:53 AM
  #2  
s2krn's Avatar
Evolving Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 168
Likes: 0
From: Arkansas
Who did your tune? What type of Dyno? Was it Dynoed before cams? Have you thought about a 10.5 hotside, 02 housing, or exhaust manifold? Those would open it up a little.
Reply
Old Jan 14, 2008 | 04:17 AM
  #3  
AndyBandy's Avatar
Evolved Member
iTrader: (37)
 
Joined: Oct 2005
Posts: 542
Likes: 27
From: Frederick, MD
that sounds about right. In my old 03 i put down 333, but i also had o2 housing, AEM EMS, and intercooler.

Boost Leak maybe? I had a leaky throttle body shaft seal that kept me from keeping more than 18 psi on the dyno.
Reply
Old Jan 14, 2008 | 04:17 AM
  #4  
silver9mr's Avatar
Evolved Member
iTrader: (8)
 
Joined: Jan 2008
Posts: 1,349
Likes: 1
From: lowell,MA
yea it does seem a lil low my friend has the same set up on perfomance parts and he put down 330 on his viii
Reply
Old Jan 14, 2008 | 06:52 AM
  #5  
Show286's Avatar
Evolving Member
iTrader: (8)
 
Joined: Jan 2007
Posts: 400
Likes: 0
From: Bel Air,MD
Extreme is trash. Do a little searching on this forum and you'll see why. If I were you I would not drive the car at all and make an appointment for a new tune ASAP. Take it to AMS(atlantic motorsports),ISP, or DTM.
Reply
Old Jan 14, 2008 | 07:15 AM
  #6  
DTM's Avatar
DTM
Account Disabled
iTrader: (4)
 
Joined: Jun 2007
Posts: 754
Likes: 0
From: Dulles, VA 20166
pm'd
Reply
Old Jan 14, 2008 | 07:18 AM
  #7  
TeStUdO's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2005
Posts: 1,986
Likes: 41
From: Secret Tweaker Pad
Originally Posted by DTM
pm'd
Good, hopefully you guys can cut him a break since he didn't get his $'s worth with that tune.
Reply
Old Jan 14, 2008 | 07:21 AM
  #8  
DTM's Avatar
DTM
Account Disabled
iTrader: (4)
 
Joined: Jun 2007
Posts: 754
Likes: 0
From: Dulles, VA 20166
Already done
Reply
Old Jan 14, 2008 | 10:36 AM
  #9  
evokel's Avatar
Evolved Member
iTrader: (10)
 
Joined: Jul 2007
Posts: 1,152
Likes: 0
From: Orlando,Florida
thats some garbage numbers if you ask me
Reply
Old Jan 14, 2008 | 01:29 PM
  #10  
markymark1082's Avatar
Thread Starter
Evolved Member
iTrader: (4)
 
Joined: Dec 2006
Posts: 520
Likes: 0
From: San Antonio, TX
Originally Posted by s2krn
Who did your tune? What type of Dyno? Was it Dynoed before cams? Have you thought about a 10.5 hotside, 02 housing, or exhaust manifold? Those would open it up a little.
I got it done at Extreme Motorsports on their Dynojet. I never had it dynoed before the cams. I thought about all those parts but, I am probably going to get a Green soon so I am holding off on that stuff.
Reply
Old Jan 14, 2008 | 03:29 PM
  #11  
EvoVIII808's Avatar
Evolving Member
iTrader: (4)
 
Joined: Jan 2007
Posts: 480
Likes: 0
From: Washington
yeh those number do seem alittle low. i came in at 350hp,300tq. tuned by Mellon. Great tuner and he is on Evom.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Guerillah
The Loft / EvoM Car Talk Corner
7
Mar 6, 2008 04:49 PM
smarsenal
Motor Sports
6
Feb 9, 2007 11:33 AM
Johnny Boy
Evo General
17
Nov 21, 2006 05:34 AM
SiCKlEyWiKeD
Evo Show / Shine
23
Jul 21, 2006 08:56 PM
mitsubishimanny
04-06 Lancer Ralliart Show & Shine
25
Apr 24, 2006 12:37 PM




All times are GMT -7. The time now is 05:26 AM.