Evo Turbo Information
Mar 1, 2006, 05:41 AM
#121
Evolving Member
iTrader: (1)
Join Date: Sep 2004
Location: NOVA
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
If only we could add compressor flow maps and max cfm's for each of the turbos listed, this thread would be complete ...
I did find this page which seems to have some mitsu compressor maps ...
link
I did find this page which seems to have some mitsu compressor maps ...
link
Sep 1, 2006, 12:44 PM
#123
Newbie
Join Date: Mar 2006
Location: Karachi, Pakistan
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
I have a JDM evo and am getting a good deal on a JDM Evo 8 MR turbo from a friend. But someone told me that it does not have 10.5 turbine housing... is it true ??
Does someone have the exact spec of the JDM evo 8 turbo and JDM evo 8 MR turbo and Cams
Thanks
Does someone have the exact spec of the JDM evo 8 turbo and JDM evo 8 MR turbo and Cams
Thanks
Sep 23, 2006, 06:35 AM
#124
Newbie
Join Date: Jul 2006
Location: Guatemala
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
i have this:
Evolution 3
Turbo = TD05H–16G6-7
Nozzle Area (cm2) = 7
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 68mm wide
is it true that the most you will get out of it is about 15 - 16 psi??? if you manage to somehow get more boost you are likely just making hot air and making less power than you would at a lower boost since you are pushing the turbo way past its efficient operating range?
Evolution 3
Turbo = TD05H–16G6-7
Nozzle Area (cm2) = 7
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 68mm wide
is it true that the most you will get out of it is about 15 - 16 psi??? if you manage to somehow get more boost you are likely just making hot air and making less power than you would at a lower boost since you are pushing the turbo way past its efficient operating range?
Sep 23, 2006, 07:17 AM
#125
Originally Posted by Blaster
i have this:
Evolution 3
Turbo = TD05H–16G6-7
Nozzle Area (cm2) = 7
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 68mm wide
is it true that the most you will get out of it is about 15 - 16 psi??? if you manage to somehow get more boost you are likely just making hot air and making less power than you would at a lower boost since you are pushing the turbo way past its efficient operating range?
Evolution 3
Turbo = TD05H–16G6-7
Nozzle Area (cm2) = 7
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 68mm wide
is it true that the most you will get out of it is about 15 - 16 psi??? if you manage to somehow get more boost you are likely just making hot air and making less power than you would at a lower boost since you are pushing the turbo way past its efficient operating range?
On 93 octane, I run 22psi. Works great.
Sep 28, 2006, 01:27 AM
#126
Evolving Member
Join Date: Jul 2001
Location: Back and forth in the pacific
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know more about this turbo TD05HRA-16G6-9.8T - I just bought it and have installed it. seems to spool much quicker. However, how much max boost will it run and any flow ratings? charts? ect.
Btw anyone want to buy an EVO 6 turbo?
thanks.
Btw anyone want to buy an EVO 6 turbo?
thanks.
? Its the same one
Feb 3, 2007, 12:40 PM
#131
Newbie
Join Date: May 2006
Location: MA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
