I am really confused here, and hopefully someone can better explain it to me.

When trying to run higher PSI, you are suppose to double up the wastegate springs (1 small spring + 1 large spring = Total PSI) Well my confusion comes in at this: If you double the springs (a 1 BAR spring and a .5 BAR spring) when the PSI reaches the 1 BAR pressure, wouldnt the PSI over come both springs at 1 BAR not 1.5 BAR?

 

help anyone?

 

Nope... you combine the springs. With just the big blue I was boosting to 14 psi. Added the little green and went to a gm 3 port bcs and it is at 21 psi of base spring pressure.

 

ok, I just wanted to make sure. It just didnt make sense to me. thanks

 

Tial 44 .PDF

http://www.tialmedia.com/documents/w3_tial_44_sp.pdf

 

question about that though.. what size/color spring does the tial 44mm come with by defualt?

 

there is no default, they are built by order

 

ahh.. ok.. thanks..