*NEW* tune w/ cosworths
I'm not hating on anyone..... I'm stating facts. Stock uncorked EVOs pull 116-118mph traps with stock cams.
Now .... how many sets of evo9 cams have been sold? I suspect crap loads of them.... so where are all the 120mph trapping EVOs at?
The truth is....... The EVO9 is limited by octane not cams.
There are hundreds of theads on this forum that have dyno charts that not even two people can agree on. Dynos are fluff and mean nothing. I can take my lapping day tune and add 2* of timing across the board and see 20whp jump. I can take my car to the same dyno on a cold day and see a 20whp jump. I can change nothing other than putting my car on a dynojet and see a 35whp jump. Simply dynoing in 4th gear compared to 3rd gear will show a big gap in power.
SHOW ME ALL THE MF'ing 120MPH TRAPS!!!!!
Now .... how many sets of evo9 cams have been sold? I suspect crap loads of them.... so where are all the 120mph trapping EVOs at?
The truth is....... The EVO9 is limited by octane not cams.
There are hundreds of theads on this forum that have dyno charts that not even two people can agree on. Dynos are fluff and mean nothing. I can take my lapping day tune and add 2* of timing across the board and see 20whp jump. I can take my car to the same dyno on a cold day and see a 20whp jump. I can change nothing other than putting my car on a dynojet and see a 35whp jump. Simply dynoing in 4th gear compared to 3rd gear will show a big gap in power.
SHOW ME ALL THE MF'ing 120MPH TRAPS!!!!!
!
Well the ix's have that pesky gearing, could be inhibiting the high traps. just throwing that out there as not a lot of people invest in the 8's gears.
Last edited by Sluggo; Apr 19, 2008 at 08:54 AM.
+14/15 Nice. You got better results than most folks.
Which should be expected from one of the better tuners on the planet.
Now get some better fuel and throw 6 more LBS of boost at it.
Which should be expected from one of the better tuners on the planet.
Now get some better fuel and throw 6 more LBS of boost at it.
Thread Starter
Evolved Member
iTrader: (4)
Joined: Aug 2006
Posts: 1,466
Likes: 1
From: FLA-HI-SoCal
well heres an update:
the Forge mbc was not holdin all to well resulting in mixed numbers.
I mean we would set it to 22 and do 1 pull, not touch it run agian after a brief 15min cool down and it would be at 20... WTF and this was all day
so I guess you can say I made 330.88 hp/ 321.27 tq... considering my last tune I made 316/305. The torque is AMAZING!
I'll post up the overlay of the previous graph to have an comparision. In the top-end you can see about a 30 or so hp increase and of course the whopping torque increase right off the bat.
all in all there is an increase THROUGHOUT the entire powerband and you can feel it....
props to Cosworth for puttin out a worthy cam and of course to Alfred at Tuning Technologies puttin it all together with the sake of wonderful 91 Cali octane
...I said before that I would slap the cams in and dyno em to see just what the cams would do, sorry. well I had a little mis-communication and had the injectors installed at the same time and Alfred thought it wouldnt be a good thing to run it that way... my bad
but I hope this all helped in your quest for the right cam for whom ever....
holla
the Forge mbc was not holdin all to well resulting in mixed numbers.
I mean we would set it to 22 and do 1 pull, not touch it run agian after a brief 15min cool down and it would be at 20... WTF and this was all day
so I guess you can say I made 330.88 hp/ 321.27 tq... considering my last tune I made 316/305. The torque is AMAZING!
I'll post up the overlay of the previous graph to have an comparision. In the top-end you can see about a 30 or so hp increase and of course the whopping torque increase right off the bat.
all in all there is an increase THROUGHOUT the entire powerband and you can feel it....
props to Cosworth for puttin out a worthy cam and of course to Alfred at Tuning Technologies puttin it all together with the sake of wonderful 91 Cali octane
...I said before that I would slap the cams in and dyno em to see just what the cams would do, sorry. well I had a little mis-communication and had the injectors installed at the same time and Alfred thought it wouldnt be a good thing to run it that way... my bad
but I hope this all helped in your quest for the right cam for whom ever....
holla
