OK, here's the scoop. The car is finished and ready for action, well almost
The clutch line split on the drive home and I had to drive most of the way with no clutch-LOL... Parts are in transit and I repaired the line just in case the new one doesn't arrive. The car made about 20 runs and never skipped a beat. The dyno room was 94 degrees and the car struggled a little with heat issues, but still made great power. It made about 4 430 tq passes and most whp numbers were around 410. The 10 pt cage is beautiful, but it's a little weird to drive with a window net. People on the highway kind of look at you funny If all goes well it is going to the track tomorrow and will make a 10 sec run...
run 12- 412/409
run 13- 411/414
run 14 410/437
run 16 413/428
A quick video:
http://videos.streetfire.net/video/I...YNO_158386.htm
A quick thanks Mike and Cwill(AWDMOTORSPORTS), and Anthony(RACE-CAR BUILDERS). Everyone has worked really hard to get this car done. Mike and Cwill go above and beyond everyday doing most of the dirty work and locating hard to find parts And Anthony took the car apart and built an awesome 10 point cage while I was suntanning in the Islands All great people to work with in my opinion...
I'll keep adding pics over the next hour, but want to get the post up. So, keep checking back for more pics.
The clutch line split on the drive home and I had to drive most of the way with no clutch-LOL... Parts are in transit and I repaired the line just in case the new one doesn't arrive. The car made about 20 runs and never skipped a beat. The dyno room was 94 degrees and the car struggled a little with heat issues, but still made great power. It made about 4 430 tq passes and most whp numbers were around 410. The 10 pt cage is beautiful, but it's a little weird to drive with a window net. People on the highway kind of look at you funny If all goes well it is going to the track tomorrow and will make a 10 sec run...run 12- 412/409
run 13- 411/414
run 14 410/437
run 16 413/428
A quick video:
http://videos.streetfire.net/video/I...YNO_158386.htm
A quick thanks Mike and Cwill(AWDMOTORSPORTS), and Anthony(RACE-CAR BUILDERS). Everyone has worked really hard to get this car done. Mike and Cwill go above and beyond everyday doing most of the dirty work and locating hard to find parts
And Anthony took the car apart and built an awesome 10 point cage while I was suntanning in the Islands All great people to work with in my opinion...I'll keep adding pics over the next hour, but want to get the post up. So, keep checking back for more pics.
Former Sponsor
Thanks for all the good feedback Brian.. I hope you can get to the track Wed and run a 10 sec pass!!
Quote:
You guys have done so much for me and it is greatly appreciated. My car is starting to think it has a second homeOriginally Posted by Mike@AwdMotorsports
Thanks for all the good feedback Brian.. I hope you can get to the track Wed and run a 10 sec pass!!
LOL... Hopefully the car will perform well at Moroso tomorrow. Good luck in NJ this weekend...Thanks for the props guys. I can't wait to drive the car tomorrow since I didn't get a chance really on the journey home
Quote:
Originally Posted by hytek369
nice, what is your list of mods?
Just bolt ons
Stock block, stock head, stock turbo. Video is uploading now.
