Buschur Racing, HTA35r, 93 octane and 10.0's
Wow your car and Trent are dialed in
Car really runs great...... congrats!
I asked Big Al this in his thread but thought i'd ask over here also if you don't mind as it does not sound like the clutch launch device you guys help make/design was being used
Sorry if i'm a bit late on info but i'm not on here as much as some.......are you guys still testing it out or working some bugs out?
Car really runs great...... congrats!
I asked Big Al this in his thread but thought i'd ask over here also if you don't mind as it does not sound like the clutch launch device you guys help make/design was being used
Sorry if i'm a bit late on info but i'm not on here as much as some.......are you guys still testing it out or working some bugs out?
for the bone-head question to both you DB and Al.I had assumed that since the Bad Bish car had it that these 2 Evos had it as well.
After sifting through a few threads i know i was under the wrong impression.
Now i know why i got no answer from either of the 2.
Sorry to muck up the thread...............Congrats once again
David, Guess what we found? a bunch. If everything goes well, version 2 should be what you need to go into the 9's easy. ETA Wednsday, also we WILL get your 60 ft's down to your goal number. Thanks for the vote of confidence. Indy
Last edited by Indy Evo; May 9, 2008 at 12:33 PM.
Thanks for all the comments guys.
Trent is a bad *** driver and I'm lucky to have him as a friend and driver of my car for sure.
No, the launch control is not on my car YET. It will be on my car. I have it on two customer cars as of this week and am figuring out how we are going to run it through the AEM. I simply have not had time to install it with all the dyno testing I have been doing.
Now I have two more sets of cams at the shop. Indy sending a new intake next week and I have a new turbo I am going to try.
The testing may never end but to be honest, I am wishing it would. I am so wrapped up in my RS right now I have found no time to work on the EVO X further.
I have confidence in you Indy, we'll have a chance to talk a lot this weekend. Looking forward to meeting you face-to-face tomorrow.
I am completely, 100% confident that the next time the car goes to the track it is going well into the 9's on 93 octane.
Thanks again everyone. As I said, if you have any questions don't be afraid to ask.
Trent is a bad *** driver and I'm lucky to have him as a friend and driver of my car for sure.
No, the launch control is not on my car YET. It will be on my car. I have it on two customer cars as of this week and am figuring out how we are going to run it through the AEM. I simply have not had time to install it with all the dyno testing I have been doing.
Now I have two more sets of cams at the shop. Indy sending a new intake next week and I have a new turbo I am going to try.
The testing may never end but to be honest, I am wishing it would. I am so wrapped up in my RS right now I have found no time to work on the EVO X further.
I have confidence in you Indy, we'll have a chance to talk a lot this weekend. Looking forward to meeting you face-to-face tomorrow.
I am completely, 100% confident that the next time the car goes to the track it is going well into the 9's on 93 octane.
Thanks again everyone. As I said, if you have any questions don't be afraid to ask.
Thanks everyone again for the nice comments!
Dave has built one of the baddest cars, I love driving it! Dan builds a kick *** tranny, It makes me look good going through the gears! Everytime out in the car it always runs within a tenth each pass, very consistant for a stick shift car.
Im dissappointed I am not going to Indy this weekend for the Wing Warrior!
Dave has built one of the baddest cars, I love driving it! Dan builds a kick *** tranny, It makes me look good going through the gears! Everytime out in the car it always runs within a tenth each pass, very consistant for a stick shift car.
Im dissappointed I am not going to Indy this weekend for the Wing Warrior!
Trent, why don't you go in early in the morning and finish the car up, if you can get it done EARLY, I will throw it on the dyno before I leave for Indy and tune it.
I don't think running at Sea Level would help.
I don't think running at Sea Level would help.




Oh and i need to get some wheel studs for them there slicks buddy!!!