Im having my head port and polished and having the GSC S2 cams and dual titanium vlave springs and retainers in there. Are these cams too much for the evo green turbo off of FP?

 

There has been multiple posts about this subject, mostly from the guys in the northwest and they have had great results on the stock ix turbo as well as the green. Search through the turbo and drivetrain threads and your bound to find some good info on the matter.

 

There was a thread by johnbradley that had quite a bit of discussion and interesting information.

 

S2s are not too much cam for a Mivec IX.

 

anybody know the full specs of the GSC S2
i checked on there website and they dont state the the lift @ 1 mm.

thinking of upgrading my cossie M2 cams

 

the specs on the S2's are in this thread somewhere https://www.evolutionm.net/forums/sh...d.php?t=330531

 

are you looking for the specs at the cam or at the valve?

 

How much does these cams normally run? I had GSC s1.. Sold them for bigger cams but I havent bought any yet..... Still deciding between Coswrth M2 and Gcs s2.

Thanks

 

gsc s2 for the win +1

 

So who has the best deal on them?

 

Nope..they run well

 

GSC S2s for EVO 9 are $607.
There are plenty available now, but you can check the vendor for sale section for deals on them also.

THANKS!!!

 

GSC S2s are selling for $539 from JSC Speed.

 

go with GSC

these guys make some awesome cams

 

i made 351hp/340tq with s2's and a stock 9 turbo on saturday @24psi on 92(dyno dynamics)