Yep
one step ahead of you

 

Also take a look at the inside of the hose and the outside of the IC pipe. Make sure that the inside lip of the hose is still intact. If it's torn or frayed, even a t-bolt clamp won't hold it on (not even if it were a silicone hose). On the IC pipe, make sure that it's free of debris and clean. And when you clamp the hose back onto the pipe, make sure that you are mounting the clamp past the lip of the IC pipe, not right on it.

l8r)

 

OK, I'll check all that later this morning when I get on it.

 

If all this doesnt work, then..........

 

clean inside of coupler and pipe with alcohol, then get some aquanet hairspray and use a few sprays on the pipe and it wont come off!