lowevo_IX

iTrader: (1)

ok, i have the buschur cone filter kit. i got the stock airbox off and the maf sensor on the adaptor. with the buschur kit, it comes w/ a "L" shaped bracket suppose to hold the cone filter steady and i have no clue where to attach that "L" bracket, please help. one more thing is there is a zip tie like thing on the stock rubber tube holding, i think, vaccum lines to it; the question is can i cut that zip tie so i can move the tube up more so i can fit the filter in better? please help i want to get this thing installed, thanks.

Davethewave

iTrader: (9)

yes cut the zip tie, and as for the L bracket... well your on your own with that. i just dont use mine.

lowevo_IX

iTrader: (1)

thanks for the reply. should i get another zip tie and reattach them after i adjust the tube? or just let them alone. does anyone else know where the "L" bracket goes for the buschur filter kit?

hamx0r

iTrader: (49)

woah didnt know the buschur intake came with a L bracket. I have to order me one lol. cause my filter is all chewed up from the acd reservoir. I would just try every which way to put that bracket holding up the filter.

scheides

iTrader: (10)

The L bracket mounts first to the bottom rear corner of the filter (where it meets the MAS) and then bolts to the frame. Stick it one way, then the other till you figure out where it goes.