Hello I just got this new 02 housing and I was reading that I just drill a bit of it where the WG goes or something on those lines to prevent boost creep..can anyone point me towards where I just dremel? thanks

 

Where did you read this?

 

you can port the wastgate opening bigger and smooth everything. thats about it but if its ss o2 i dont think you really need to.

 

yeah I mean Porting the wastegate opening...yea i got a SS o2 housing..so what are the benefits on making the port bigger?

 

Megan housing has a small opening where the wastegate side connects to the main part. Port that opening out and your boost creep will go away.

 

bump interested in this as the o2 housing i received seems to have a tiny wastegate hole.. Is this actually ok to dremmel/drill biggeR??

 

Yes grind it out bigger

 

i would use a dremmle! and take your time

 

Die grinder with carbide bit will eat that up! I'm doing one tommorow.

 

If you go this route becareful. This is the best method but be aware that it removes a lot of material quickly as well. The facility guys at my job let me use their air compressed grinder and the 02 housing came out beautifully.

I tried doing my buddies o2 housing with a dremmel and it took forever.

 

porting the opening not drilling is probaby what you were reading