EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

clutch job need help!!

Thread Tools
 
Search this Thread
 
Old Mar 9, 2009 | 08:57 AM
Share
  #31  
BaLListic_EVO's Avatar
BaLListic_EVO
Evolved Member
iTrader: (19)
 
Joined: Dec 2003
Posts: 1,175
Likes: 0
From: NC
i knew a guy with an ACT that did it with 2000+ miles. I believe its just one of those deals. It will do it sometimes and not others. I would drive it to break in then give it a real nasty launch and see if some heat makes the issue go away.
Reply
0
Old Mar 9, 2009 | 09:00 AM
Share
  #32  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
Originally Posted by BaLListic_EVO
i knew a guy with an ACT that did it with 2000+ miles. I believe its just one of those deals. It will do it sometimes and not others. I would drive it to break in then give it a real nasty launch and see if some heat makes the issue go away.
i got about 300 miles on it shifts great. i will launch it as soon as it hits 500 miles
Reply
0
Old Mar 9, 2009 | 09:13 AM
Share
  #33  
BaLListic_EVO's Avatar
BaLListic_EVO
Evolved Member
iTrader: (19)
 
Joined: Dec 2003
Posts: 1,175
Likes: 0
From: NC
depending on the amount of city driving you do you may require more miles. If you just do alot of highway miles the clutch will never go thru its heat cycles as intended for break in.
Reply
0
Old Mar 9, 2009 | 01:32 PM
Share
  #34  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
i drive alot i actually launched the car this afternoon properly and damn it holds great. and still makes the noise.
Reply
0
Old Mar 9, 2009 | 07:02 PM
Share
  #35  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
happened again this time my neighbors were jogging and they were "startled"
Reply
0
Old Mar 9, 2009 | 08:10 PM
Share
  #36  
05EvoVIII's Avatar
05EvoVIII
Evolving Member
iTrader: (2)
 
Joined: Jan 2005
Posts: 315
Likes: 0
From: Bourbonnias
dude just fill the tank up...go drive around till u get 500 miles on the clutch then go launch the thing n be nasty with it.....Show it who wears the pants in the relationship!
Reply
0
Old Mar 10, 2009 | 09:03 AM
Share
  #37  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
Originally Posted by 05EvoVIII
dude just fill the tank up...go drive around till u get 500 miles on the clutch then go launch the thing n be nasty with it.....Show it who wears the pants in the relationship!
michigan weather sucks it's been raining here deep so far today
Reply
0
Old Mar 11, 2009 | 02:13 AM
Share
  #38  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
forgot to mention also when i downshift to 1st gear (instead of using breaks) same thing happens
Reply
0
Old Mar 11, 2009 | 07:04 AM
Share
  #39  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
i am going to go on a 150 mile trip today so far i got 320 miles on it bump
Reply
0
Old Mar 11, 2009 | 10:25 AM
Share
  #40  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
Originally Posted by BaLListic_EVO
ever clutch with a ceramic based material i have ever heard makes this noise from a stop... i would chalk it up as normal and forget about it...btw does it sound like nails on a chalkboard? And honestly there isnt that much you can screw up when doing a clutch job. I have done 6-7 of them and never had any issues. Only issues i have ever experience was a blown axle seal due to a shops ****ty repair on a t-case.
forgot to mention it does sound like nails on chalkboard.
Reply
0
Old Mar 11, 2009 | 10:54 AM
Share
  #41  
MitsuJoe's Avatar
MitsuJoe
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
Is the noise during decel only?
Reply
0
Old Mar 11, 2009 | 02:01 PM
Share
  #42  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
happens when takeoff from a stop. when car is in motion it's fine no noise whifts great trough gears
Reply
0
Old Mar 11, 2009 | 06:31 PM
Share
  #43  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
bump
Reply
0
Old Mar 12, 2009 | 08:13 AM
Share
  #44  
Malik_EvoIX's Avatar
Malik_EvoIX
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: May 2007
Posts: 903
Likes: 0
From: Detroit Area
bump
Reply
0
Old Mar 12, 2009 | 08:26 AM
Share
  #45  
MitsuJoe's Avatar
MitsuJoe
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
Does it sound like this does it?

http://www.youtube.com/watch?v=ytdPMX-Lv0s
Reply
0



Advanced Search

All times are GMT -7. The time now is 01:34 PM.