ok i just had a clutch put in...

NOW THE CAR WONT START...
i re did timing... it has fuel and spark...

STILL WILL not start... ANY HELP????

 

damm this sucks someone help this guy

 

please LOL... im stuck i tried everything even re-uploaded my map thought the immobilizer kicked in... still no use...

 

Have you checked the connections on the starter?

 

imstilltrying to think what it could be

 

what does it do when you crank it? does it try to pull over or not? it could be the timing is off?

 

the onnections are on...
it just cranks... it DOESNT turn over... i jus charged the battery...
still NOTHING...
when i first tried teh timing was off... one tooth forward past the line on the non mivec... and 2 teeth before the mark on the mivec... tried crankin nuttin...
now timing is fixed... STILL nothing...

 

so you cranked the first time while the timing was off? if you did then i dont lknow if that could have effected now. but if you say you got fuel and spark i have no idea.

 

this.

 

if the connections were off i dont think it with even crank over.

 

Why was your timing off from doing a clutch install?

 

check all your grounds

 

to be honest with you NO IDEA...
i mean i wwas turning the crank and it wasn't turning then out of no where when forcing it i heard like a popping sound so im guessing it was the belt skipping timing..

just did a compression test 2 left cylinders 30... bent valves anyone lol????

 

Plugs?

 

Err you checked for spark,.. disregard plugs