Hi,

Im wondering if this things straight swap to my evo 9 turbo?

http://cgi.ebay.com.au/Mitsubishi-EV...3%3A1|294%3A50

its Mitsubishi EVO 9 TD06 20G Turbo Compressor Upgrade Kit.

any body use them before? im so tempted to upgrade it.
Could it be done by DIY method?

by following this rebuild guide
http://www.dsmtuners.com/forums/arti...-part-1-a.html
http://www.dsmtuners.com/forums/arti...-part-2-a.html

or Do i need to sent them out to get it done

thanks,
C

 

.... good question, but I don't know anyone with a 20G

 

the item look very promising lol... but how good is it i dont know..

any one here tried?

 

So basically, this would be an "upgrade" similar in scope to upgrading the 10.5T Evo8 turbo to the larger compressor of the Evo9?

Obviously, we don't know if the outcome will be similarly advantageous, but the intent appears to be the same. If anyhbody buys one and wants sell me their Evo9 compressor housing and wheel, let me know.

 

BTW, found a 20G thread on another forum:

http://www.socalevo.net/forum/index....487.msg7427034

Pretty interesting comparo info about half way down.

Anybody know if this compressor and wheel would bolt to a 10.5 Evo8 turbo? Seems it might...

 

The only problem is everything would still have to balanced!

 

yeah.. would you really wanna run ebay crap on your car?

plus all the corners u cut with upgrading.. then you need to get that **** balanced..

 

im thinking of rebuilding my turbo
changing the seals and while im there, 20g wheel upgrade when i opened it up.

anyway i talked to some people and YES it needs to be balanced and checked again. at the shops..

 

sounds like your playing with fire...

$400 to rebuild it. $200 for the upgrade. Your at 600.

Still seems worry some to me.

 

why not just save that money and get a nice stock appearing turbo?

 

hta 35 sounds like a plan to me