Hey guys I'm in need of some used Cometic head gasket pictures. I'm talking to a shop that says my head gasket was the problem for my blown motor. The gasket looks fine to me so I'm looking for some pictures of the sealing surface around the bore of a used gasket to see if I'm just crazy. If anyone can post some it would be a big help and put a end to some sleepless nights.

 

the head gasket caused the blown motor? or the motor blew the headgasket?

 

head gasket leak blew the motor (broken rods)

 

ive heard cometic r no good , i only use oem , wich is a great gasket

 

Thanks for the info but I'm not looking for a "I heard that..... "thread. I was just requesting some pictures.

 

http://media.photobucket.com/image/c..._1085_copy.jpg

 

AGAIN thanks for the picture but thats a brand new gasket. As I said in my OP I'm looking for some used pictures.

 

Haha i think you should drop the attitude when people are trying to help. Is the for a honda/acura or an Evo? Most people wont pull a head gasket unless its blown or leaking and then gets thrown away.Were your heads re-surfaced prior to installing the gasket?

 

It's for the evo. I know people have taken off a head to get some port work done and has pictures of it. Didn't mean to come off with a attitude. I know my gasket wasn't blown I'm just trying to show the shop that it looks normal.

 

dude ill give u the BEST ADVICE , contact cometic send them an email explain to them what u need and if its a warranty issue on a defect there give a new one , if its the shop thell tell u