Best Recirculating BOV for 35+psi
synapse will hold whatever you can throw at it (more than the 31psi that i see atleast). I get some surging issues with my setup but no flutter at all. Stock 9MR DV fluttered and leaked like it was it's job at anything above 26-28psi
What you've heard is verifiably correct. We know this to be true because we've pressure tested them to 40psi. If they didn't hold up 100%, there is no way I would consider using it or recommend it to others.
I want to make a point to all those who read this that one has no way of knowing that something 'works fine' unless he has actually static tested the BOV to a pressure at least that seen under real-world conditions. So far, I have witnessed several BOVs that were reportedly 'just fine' until a pressure test revealed that not to be the case, much to the individual's surprise.
That being said, I can almost guarantee you that at least one person in this discussion has a BOV that is leaking air at the operating pressure and they are unaware of it.
I want to make a point to all those who read this that one has no way of knowing that something 'works fine' unless he has actually static tested the BOV to a pressure at least that seen under real-world conditions. So far, I have witnessed several BOVs that were reportedly 'just fine' until a pressure test revealed that not to be the case, much to the individual's surprise.
That being said, I can almost guarantee you that at least one person in this discussion has a BOV that is leaking air at the operating pressure and they are unaware of it.
Former Sponsor
Joined: Jan 2010
Posts: 37
Likes: 0
From: California
im stuck between the aps or the synapse bov...i recommend either...since ive read up about both and both seem fine...i hear a lot about which ports to connect on the synapse though...which is why im pointing towards the aps more...