Im thinking of going with a Synapse recirculated but want to see what other bov people have held 35+psi with. Dont want Hks ssqv, so dont bother bring it up.

 

Most people running high psi on the stock maf use the forge but your going to hear mult opinions as some have better luck with synapse or other bov's

 

Just do a tial 50mm bov and your gonna love it......

 

The OP never stated whether or not he was running stock MAF or speed density setup so how can you say run the Tial and he'll love it. Running a Tial on a stock MAF is definitely not a good idea. Some people get away with it but must don't. Why would you want to VTA all that air that the ECU/MAF has already accounted for!

 

i hear this all the time from people but my last tuner was able to tune the stock ecu to run a MAF and a VTA BOV. it didnt bog or die or anything. with a good tuner you can do it.

 

Whether or not you can tune it out is not the case. First off the thread title is best recirc BOV and second your still venting all the air to the atmosphere after the MAF and ECU have already accounted for it.

 

I have heard good things about the Syncronic, APS dual vent, and Forge RS. I personally have the syncronic and love it. I get flutter in 5th gear especially when my meth is on for some reason though.

 

I'm running around 29lb on the stock IX BOV and have minor flutter issues but only under low boost. I don't think it will hold boost well around 35+ psi though.

 

I have the Synapse recirc for sale if you're interested. Check my thread in my sig.

 

go with synapse bov holds boost really well. holds my boost till 33psi

 

FWIW, I have pressure tested the Synapse unit to 40psi, and it absolutely will not leak.

 

APS dual vent DV/BOV. Nuff said.

 

New redesigned tial recirclulaing FTW! I saw it over on Highboostforrums.com. They figured out that the one looking like a bong was not going to cut it. So now they have made one that has a conventional looking outlet.

 

Tial QR. It's Tials newest recirculating BOV. I just bought one, it's a beautiful piece. The only thing that sucks is having to buy a new UICP for the tial BOV flange. Or i'm sure you can have the your old pipe re-flanged.

 

do they make an OEM soft pipe flange adapter?