Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Another 700+whp build...But this one is mine:)

Thread Tools
 
Search this Thread
 
Old May 24, 2010 | 03:58 PM
  #121  
awd2gen's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Oct 2008
Posts: 466
Likes: 1
From: Frederick, MD
Ohh and ill post dyno graph tomorrow. Headed to work now and dont have time.
Reply
Old May 24, 2010 | 06:08 PM
  #122  
HeadGames's Avatar
Former Sponsor
iTrader: (2)
 
Joined: Oct 2007
Posts: 286
Likes: 0
From: EWING,NEW JERSEY
Originally Posted by awd2gen
well finally got it tuned today...well not all the way. Made 702whp at 38psi. Ran out of time, but going to go back next weekend and see what we can get out of 45psi. The 702 was on e85 and with full exhaust that has 2 resinators and muffler. Going to eliminate the 2 resinators before next weekend as well. Aiming for over 750whp on 45psi.

that is just nasty...
Reply
Old May 24, 2010 | 06:13 PM
  #123  
AWD Motorsports's Avatar
Former Sponsor
iTrader: (211)
 
Joined: Jun 2007
Posts: 9,665
Likes: 1
From: South Florida
Originally Posted by awd2gen
well finally got it tuned today...well not all the way. Made 702whp at 38psi. Ran out of time, but going to go back next weekend and see what we can get out of 45psi. The 702 was on e85 and with full exhaust that has 2 resinators and muffler. Going to eliminate the 2 resinators before next weekend as well. Aiming for over 750whp on 45psi.
AWESOME POWER Birdman!!!! Glad i could be of assistance in helping you put the combination together.. That turbo will keep making power up at 45psi but the gains will start to diminish.. 750whp is very possible on your setup!! Good luck!!

Mike
Reply
Old May 24, 2010 | 10:13 PM
  #124  
awd2gen's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Oct 2008
Posts: 466
Likes: 1
From: Frederick, MD
Big thanks mike! I appreciate all your help. Couldn't have made it all work without it! Awdmotorsports FTW!
Reply
Old May 25, 2010 | 04:35 AM
  #125  
mrboost05's Avatar
Evolved Member
15 Year Member
iTrader: (25)
 
Joined: Sep 2006
Posts: 1,132
Likes: 2
From: maryland/west chester pa
glad you got it done man very nice numbers do you have any 93 oct numbers or do you just plan to run E 85 all the time no stations close to me except annapolis.
Reply
Old May 25, 2010 | 05:27 AM
  #126  
GTEIS300's Avatar
Newbie
 
Joined: Jan 2010
Posts: 9
Likes: 0
From: Frederick, MD
Here is a few Dyno Videos. Bird and I will definitely get some in car videos for everyone. This car is just ridiculous.

702awhp Pull
http://www.youtube.com/watch?v=07ZdTjr7PDk

http://www.youtube.com/watch?v=WqK3v51hb6Y

http://www.youtube.com/watch?v=S5ZBw-Mykj8

http://www.youtube.com/watch?v=l7fTEkGK7Mg
Reply
Old May 25, 2010 | 05:50 AM
  #127  
c_penson's Avatar
Newbie
 
Joined: May 2004
Posts: 38
Likes: 0
Mine picks up fuel to the last drop but i had to redo the expoxy that seals the wires in because it was leaking fuel. I do have the twin densos kit maybe thats why?


Originally Posted by EmeryatSTM
Looking good! Be careful with the full blown kit. For some reason mine will not pick up fuel unless its over 1/4 tank.



-Em
Reply
Old May 25, 2010 | 06:09 AM
  #128  
awd2gen's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Oct 2008
Posts: 466
Likes: 1
From: Frederick, MD
Originally Posted by mrboost05
glad you got it done man very nice numbers do you have any 93 oct numbers or do you just plan to run E 85 all the time no stations close to me except annapolis.
I did some 93 runs but didnt really get into to much detail with it. I want to eventually but we were pressed for time so we switched over to e85. I believe on 93 when we stopped it was like 515hp. we made like 3 pulls on 93 so those numbers are really not anything to base off of.

Im really confident about the power it will make at 45psi. I think 750+ should be easy. The 702 was at 200 degree coolant temps, through a restrictive exhaust, and 11.8 afr. can lean it out a little more on e85. Im just enjoying it now though. Makes me smile every time i floor it and get thrown back in the seat..
Reply
Old May 26, 2010 | 05:45 PM
  #129  
mrboost05's Avatar
Evolved Member
15 Year Member
iTrader: (25)
 
Joined: Sep 2006
Posts: 1,132
Likes: 2
From: maryland/west chester pa
lucky man good numbers all around how is brad with stock ecu ?
Reply
Old May 26, 2010 | 09:05 PM
  #130  
awd2gen's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Oct 2008
Posts: 466
Likes: 1
From: Frederick, MD
Originally Posted by mrboost05
lucky man good numbers all around how is brad with stock ecu ?
Brad is good with stock ecu as well. Im probably going to have him setup something with mine for emissions. He said it takes a little longer to do than with aem but no issues or real drawl backs.
Reply
Old May 26, 2010 | 09:17 PM
  #131  
MRfabolous's Avatar
Evolved Member
iTrader: (17)
 
Joined: Oct 2007
Posts: 643
Likes: 0
From: Maryland
yea he can just set up a quick map for just driving it to emissions and then you can swap back the aem.
Reply
Old May 26, 2010 | 09:19 PM
  #132  
MRfabolous's Avatar
Evolved Member
iTrader: (17)
 
Joined: Oct 2007
Posts: 643
Likes: 0
From: Maryland
very impressive power dude i bet that thing halls *** prolly spins the tires in 3rd from a roll.
Reply
Old May 26, 2010 | 10:20 PM
  #133  
red03evo's Avatar
Evolved Member
iTrader: (20)
 
Joined: Apr 2007
Posts: 982
Likes: 0
From: Fairfax
nice #'s
Reply
Old May 26, 2010 | 10:21 PM
  #134  
RAbishi's Avatar
Evolved Member
iTrader: (4)
 
Joined: Mar 2006
Posts: 942
Likes: 0
From: South Dakota
Congrats, nice results!
Reply
Old May 27, 2010 | 11:53 AM
  #135  
awd2gen's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Oct 2008
Posts: 466
Likes: 1
From: Frederick, MD
Thanks everyone appreciate the comments! Gonna upgrade wategate lines to AN lines and hopefully get ahold of coil on plug to see 45 psi soon.
Reply



All times are GMT -7. The time now is 04:36 PM.