Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Sparkies! (Pulstar anyone!?)

Thread Tools
 
Search this Thread
 
Old Mar 17, 2010 | 08:17 PM
  #1  
~Evil_Evooooo~'s Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Nov 2003
Posts: 124
Likes: 0
From: Los Angeles
Sparkies! (Pulstar anyone!?)

Hi everyone!
Just wondering what our members are running in their spark plug sockets, cause its time for me to replace my spark plugs on my evo 8 and was wondering whats a good plug? also any one has had good feed back on those pulstar spark plugs? do they really increase th HP?
Thanks in advance!
Reply
Old Mar 17, 2010 | 08:20 PM
  #2  
wshihdnevo's Avatar
Evolved Member
15 Year Member
iTrader: (88)
 
Joined: Dec 2006
Posts: 2,765
Likes: 1
From: Tacoma
No offense, but as long as you have been on this site I wouldnt think you would be asking this question this stuff is everywhere on here. In an VIII I would run NGK 5534 which are the BPR7ES. There are others such as the Iridiums, but depending on your setup you can determine which is best suited for you.

Last edited by wshihdnevo; Mar 17, 2010 at 08:44 PM.
Reply
Old Mar 17, 2010 | 08:25 PM
  #3  
WAIRONWORKER's Avatar
Evolving Member
iTrader: (6)
 
Joined: Jan 2008
Posts: 356
Likes: 0
From: here and there
lol use a hamster...
Reply
Old Mar 17, 2010 | 08:29 PM
  #4  
Chele's Avatar
Evolving Member
15 Year Member
iTrader: (16)
 
Joined: May 2009
Posts: 292
Likes: 0
From: Cape Coral, Florida
I don't know if Pulstar revised their design, but they broke when used on turbo vehicles. They also had only one heat range. I use Denso iridiums.
Reply
Old Mar 17, 2010 | 08:32 PM
  #5  
sho669's Avatar
Evolved Member
iTrader: (34)
 
Joined: Sep 2008
Posts: 741
Likes: 1
From: Humboldt/Sac County, CA
search the pulsestar plugs...ugly stuff...
Reply
Old Mar 17, 2010 | 10:54 PM
  #6  
~Evil_Evooooo~'s Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Nov 2003
Posts: 124
Likes: 0
From: Los Angeles
thanks again guys, the 5534 plugs is what i was looking for. how about the cables? any upgrades?
Reply
Old Mar 17, 2010 | 11:47 PM
  #7  
wshihdnevo's Avatar
Evolved Member
15 Year Member
iTrader: (88)
 
Joined: Dec 2006
Posts: 2,765
Likes: 1
From: Tacoma
Originally Posted by ~Evil_Evooooo~
thanks again guys, the 5534 plugs is what i was looking for. how about the cables? any upgrades?

If you mean the spark plug wires, no the stock ones work fine, unless yours are damaged or you need to upgrade to a COP setup.
Reply
Old Mar 17, 2010 | 11:56 PM
  #8  
kanyonkid's Avatar
Evolved Member
iTrader: (33)
 
Joined: Oct 2007
Posts: 1,276
Likes: 0
From: SoCal/MS
uhhh, pulstar plugs will make ur motor blow up.. not literally but mine almost did,i made it a mile before i heard the worst noise a motor can make
Reply
Old Mar 18, 2010 | 03:27 PM
  #9  
~Evil_Evooooo~'s Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Nov 2003
Posts: 124
Likes: 0
From: Los Angeles
Oh wow...good imput thanks guys!
Reply
Old Mar 18, 2010 | 05:01 PM
  #10  
~Evil_Evooooo~'s Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Nov 2003
Posts: 124
Likes: 0
From: Los Angeles
So I got the ngk bpr7es any 1 know the gap?
Reply
Old Mar 18, 2010 | 09:11 PM
  #11  
itr.#1446's Avatar
Newbie
iTrader: (4)
 
Joined: May 2008
Posts: 94
Likes: 0
From: North Jersey
Iridiums come pre gapped if you attempt to gap them you can risk damaging them
Reply
Old Mar 18, 2010 | 09:18 PM
  #12  
sparky's Avatar
Evolved Member
iTrader: (1)
 
Joined: Mar 2005
Posts: 7,905
Likes: 5
From: Mesoamerica/ SF Bay Area
Originally Posted by ~Evil_Evooooo~
So I got the ngk bpr7es any 1 know the gap?
Set the BPR7ES's at .024"
Reply
Old Mar 19, 2010 | 12:11 AM
  #13  
project_skyline's Avatar
Evolved Member
15 Year Member
iTrader: (30)
 
Joined: Jun 2007
Posts: 2,532
Likes: 1
From: Colorado
Pulstar FTL!!! Those only worked on NA cars, everything FI blew up the plugs or the motors lol.

Denso or NGK all the way.
Reply
Old Mar 19, 2010 | 02:53 AM
  #14  
MR. EVO MR's Avatar
Account Disabled
iTrader: (9)
 
Joined: Jan 2005
Posts: 1,761
Likes: 4
From: :noitacoL
please stop bumping this worthless thread, someone here might try them and blow his engine.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jovan Caro
Evo General
20
Mar 28, 2017 09:51 PM
Newuser213
Lancer Engine Tech
3
Jul 18, 2016 02:11 AM
5LEEPERISAH23I
Evo Engine / Turbo / Drivetrain
15
Sep 13, 2010 03:33 PM
psxnitro
Lancer How To Requests / Questions / Tips
12
Jun 10, 2008 01:15 PM
batty
Evo Engine / Turbo / Drivetrain
4
Nov 11, 2004 08:11 PM




All times are GMT -7. The time now is 01:57 PM.