Those are updated parts. You´ll have replace them as a set, but buy them individually. I´ve just found in the US all the parts needed for my VII gearbox, even thou the car wasn´t sold there.

 

Ok. Nice.

If you have the numbers, please post up the 5th and reverse for my box.

I may just complete the set cause I got small gritgoing in 5th.

Thanks.

 

Just a bump.
Don't let me turn blue...I'm hold in my breath.

 

Sorry! I´ll try to check it out tonight. I´m in a hurry to put my car back on the road!

 

Ok. Thanks.
I'll be here.

 

These are for a CN9A Evo 4 RS EURO gearbox:

REV SYNCHRONIZER RING - MN168936
5TH SYNCHRONIZER RING - MR581382
SPRINGS (1 FOR EACH RING) - MR581383
5TH/REV SLEEVE - MN168857
REV BEARING - MD744537
5TH BEARING - MD748456

You better change them as a set.

 

Thanks a bungle LCS.

Although mine was from a JDM model this should be ok.

 

Hi again,

I'm now in search for the 3/4 selector fork and both output shaft tapered bearings.
Anyone have the numbers for these.

Also, does any vendor make stronger forks for our box.

 

JNZ tuning internet quote came to $700 plus shipping for all synchro set, hubs and sleeves.
My direction is now focused on a used USDM Evo 8 5-speed box.

Is the ratio in the 8RS different from a 8GSR?

 

3/4 fork - MD746338
Bearing 1 - MD747745
Bearing 2 - MD748457

 

Thx again LCS