I'm replacing my cylinder head on my 03 Evo 8 and there is a difference in the heads. I'm not sure how this new head is routed. The original head has only a single outlet press fitting the new head has a larger with a T.

New Head unknown year


Original Head 03 Evo 8

 

What year is the New to you head off of??

 

updated with year info

 

that "T" feeds the water for the throttle body.
you could just make your own pipe for that, no worries

 

Just cap the bigger nipple and use the smaller just like the stock was setup. As a fyi its a jdm head of some sort. My jdm head off a airtrek looks like that.

 

that large section of the "T" feeds the heater core inside the firewall.

 

Looks like a 2006 head.

 

Thxs for the responses, guess if the head lines up I'll just cap off the larger and roll with it.

Thank you

 

Check the other side for a mivec feed hole

 

Looks like an IX head to me +1 on the mivec feed on the other side

 

evo 4 has T evo 8 does not. the water necks are different between the cars. lots of 4 heads making their way over here.

 

my evo 6 head was like that too Jerry