Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Clicking noise when i'm Driving!

Thread Tools
 
Search this Thread
 
Old Sep 18, 2011 | 03:19 PM
  #1  
Netolopez's Avatar
Thread Starter
Newbie
 
Joined: Sep 2011
Posts: 7
Likes: 0
From: Tulsa, OK (918)
Clicking noise when i'm Driving!

This noise started last friday while i was driving at 40mph, it doesn't do it while just sitting, but only while driving. I thought i was something lose around the drivetrain but i checked everything and nothing was lose or hanging. Any suggestions? it looks bad coming from an evo, i hate it.
Reply
Old Sep 18, 2011 | 03:38 PM
  #2  
MRfabolous's Avatar
Evolved Member
iTrader: (17)
 
Joined: Oct 2007
Posts: 643
Likes: 0
From: Maryland
check cv joints they tend to click when low in greese or ripped open
Reply
Old Sep 18, 2011 | 03:54 PM
  #3  
xRoguex's Avatar
Evolved Member
iTrader: (15)
 
Joined: Apr 2009
Posts: 1,666
Likes: 12
From: Pittsburgh, PA
^^^^^^^^^^^^^^^^^^^^ +1
Reply
Old Sep 18, 2011 | 04:35 PM
  #4  
longdingydong's Avatar
Account Disabled
iTrader: (9)
 
Joined: Jun 2011
Posts: 136
Likes: 0
From: fl
drive in a figure 8 to check axles sounds like the culprit
Reply
Old Sep 19, 2011 | 12:55 AM
  #5  
mirkendargen's Avatar
Evolving Member
iTrader: (2)
 
Joined: Jun 2010
Posts: 436
Likes: 0
From: Oklahoma
I have a kinda rattle/tick noise from 2500-3000RPM. I think it's the inner wheel well plastic piece knocking against the oil filter because I don't have the undertray on to secure it. When I changed my oil the last time I noticed the paint was scraped off the oil filter in a spot where that piece must have been contacting it. Might not be what's going on for you, but it's easy to check.
Reply
Old Sep 19, 2011 | 04:26 PM
  #6  
Netolopez's Avatar
Thread Starter
Newbie
 
Joined: Sep 2011
Posts: 7
Likes: 0
From: Tulsa, OK (918)
Originally Posted by mirkendargen
I have a kinda rattle/tick noise from 2500-3000RPM. I think it's the inner wheel well plastic piece knocking against the oil filter because I don't have the undertray on to secure it. When I changed my oil the last time I noticed the paint was scraped off the oil filter in a spot where that piece must have been contacting it. Might not be what's going on for you, but it's easy to check.
It's my drive shaft.
Reply
Old Apr 15, 2012 | 02:40 PM
  #7  
shadovarian's Avatar
Evolving Member
iTrader: (1)
 
Joined: Apr 2011
Posts: 116
Likes: 1
From: Paducah, ky
What was wrong with your drive shaft I am getting a similar sound.

Last edited by shadovarian; Apr 15, 2012 at 02:53 PM.
Reply
Old Apr 16, 2012 | 03:30 AM
  #8  
GSR ONE's Avatar
Newbie
 
Joined: Aug 2011
Posts: 83
Likes: 1
From: Australia
I had something similar to this, does the clicking start after a certain speed. In my case it turned out to be one of the rubber grommets around the drive shaft had torn and was hitting on the chassis.
Reply
Old Dec 13, 2013 | 06:44 AM
  #9  
st_evo's Avatar
Newbie
iTrader: (14)
 
Joined: Jul 2004
Posts: 44
Likes: 1
From: Morgantown,West Virginia
Can we bump this thread? Same problem here!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
shane_evo7
Evo Engine / Turbo / Drivetrain
1
Jun 11, 2017 01:26 PM
babaz7
Evo Engine / Turbo / Drivetrain
0
Jun 3, 2017 08:35 PM
BluEvo62
Evo X General
6
Jul 12, 2016 07:05 PM
Vidulea
Evo General
25
Oct 26, 2013 02:12 PM
8OhOh2
Evo X Tires / Wheels / Brakes / Suspension
21
Jul 18, 2013 06:19 PM




All times are GMT -7. The time now is 10:15 AM.