Would it be posible to use the stock -6 fuel feed line as the Fuel Return Line? I am upgrading to a -8 Fuel Feed line From my buschur Double pumper and I was curious if i could just use the stock -6 hard line rather than running two lines. Any advise would be much apreciated.

 

Interesting never thought of that.. I don't see y it wouldn't.. Wonder wat every1 else thinks..

 

This is how ams does their 1000hp fuel system...

 

Thanks for the advise guys i think i will do that rather than running two lines. if any one has any advise please let me know!

 

I am thinking of doing the exact same thing, are you sure the stock feed line is the size of -6 AN?

 

Positive. I will be doing this mod soon, but I just ran -8 fuel lines up front and had to reduce it to -6 to make it meet up to the stock line tell I max them out and I Believe thats around 800WHP.

 

Stock feed line is metric, but is roughly a -5. I'm 100 percent sure of this.