I got this fluid from Mitsu dealership for the transmission. Will it also work for the transfer case?


In addition to the above question. I am in the middle of a clutch install and removed the banjo bolt in order to get at a t-case bolt. What fluid is needed to replace that and or is that the same fluid needed for the transfer case?

 

the transfer case and transmission take 2 different fluids .. i know the transfer case is a red diaqueen box like that one... i'm not sure which banjo bolt ur referring to

 

its on the passenger side top of transfer case. it's connected with a cooper line and this banjo bolt.

 

Thats the line for the ACD. Good luck..

 

right, but since I disconnected that line, I need to fill it up. is it the resv. thats in the trunk? ATF-3 iirc?

 

key to on and hold down gas pedal for 5? 10? seconds.... pump will kick on. Just open bottom bleeder when its running and shut before it stops.

 

thanks I read and understand that from previous theads. I'm now trying to figure out if that fluid I drained by removing that banjo bolt is Tcase fluid or from the ACD resv...

 

acd fluid. The tcase is self contained..

 

which ACD is ATF-3 right?

 

i think so