Hello,

If you have seen my build thread you would already be up to date on my turbo issue. I had a HTA Green and I loved it. Great spool nice stock appearance.... Appearance saved me from being required to ware a fire suit at my local track! Unfortunately I had a thrust washer brake down and passed oil through the journal bearing of the Green and destroyed it. I have since rebuilt the engine and shooting for 600hp (list of mods below). This was an unexpected issue and my Budget did not account for this. So I am looking for something on the LOW or even Used. New journal bearing turbos are not bad prices but concerning as they do ware! Ball bearing is like a 600$ upgrade to any base journal that's insane! There are a few things i still need to upgrade such as injectors and a second fuel pump. I already have a second fuel pump but figuring out how to adapt it in the safest and inexpensive way.

If anyone has a used turbo I will more then likely be interested. Help me decide the best way to rectify this issue. I have been thinking something around HTA 3582 or 3586 as Blue suggested in my build thread (link below) I would also need a manifold.

The car is being built for street fun maybe some strip but KCIR THE LOCAL TRACK CLOSED NOW. So it might possibly even be a DD. Stupid rich *** cry babies, cried and B****ED enough about noise, so they got what they wanted a track and historical site for racing since 1967 is now demolished to become a park which is which is in the middle of NO WERE! These Rich F***KS' built there houses after the track was there already! it's all BS KANSAS CITY F***ING SUCKS sorry for the language had to get that out!

"Any Help is Good Help"
https://www.evolutionm.net/forums/al...as-wanted.html

Manely Rods
ARP Mains
Acl Bearings
Cut & Polished OEM Crank (Jackson Auto Machine)


Head
Cometic Head gasket
Brian Crower std valves,
Brian Crower Springs
Ferrea Valve Guides and Seals
Jackson Auto Lifters
Kelford 272 Cams
ARP Head Studs

Fuel/Induction System
1000cc RC injectors
Walbro 255
Fp Green .73 HTA (Bad Needs Rebuild) (update... can't rebuild)
^^^^^^^^^^^^^^^ NEED REPLACEMENT^^^^^^^^^^^^^
AEM Intake
Paerrin Front mount W/piping.
Greedy Type RS Bov


Driveline
ACT heavy duty (Street disk now not 6 punk)
Shep 2 T-Case
New ACT throw out bearing
Parrent Short throw (whole assembly bushings ect.)

Electronics
Defi Gauges
Innovate Wideband
Electric BC Solenoid

Suspension
Eibach Drop Springs
Cusco TI Strut bar

 

anyone?