Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Which Injector Brand???

Thread Tools
 
Search this Thread
 
Old Jun 3, 2012 | 08:55 AM
  #1  
jameswwt's Avatar
Thread Starter
Evolved Member
 
Joined: Aug 2010
Posts: 1,426
Likes: 2
From: The Universe
Which Injector Brand???

Hi Guys,
im currently using sard 850cc injector and im planing to change to other brand as im having problem to get the scaling & latencies correct.

My current scaling is = 943 cc/min
Latencies = 6.120 / 3.120 / 1.992 / 1.320 / 1.008 / 0.672 / 0.408

Have been cracking our head on figuring out the scaling and the 943cc/min got the nearest AFR of 14.7

Pls kindly advise which injector brand suit Evo's most as i know some injector doesn't close up quick enough resulting on rich AFR during Throttle Lift Off?

1) FIC
2) Precision - PTE
3) Power Enterprise - PE
4) RC
5) Denso

Which brand will come with their precise Scaling & Latencies Table/Details?

Thanks

Last edited by jameswwt; Jun 3, 2012 at 09:16 AM.
Reply
Old Jun 3, 2012 | 09:00 AM
  #2  
foxbear2277's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2009
Posts: 700
Likes: 0
From: canada
I will be running ID but its not on your list... Out of the ones listed, every company I contacted about my build advised me and point me in the direction of FIC (Seccond to ID, companies pretty much told me if I want to save some money, go FIC over ID)
Reply
Old Jun 3, 2012 | 09:15 AM
  #3  
EVOn9ne's Avatar
Newbie
iTrader: (3)
 
Joined: Mar 2007
Posts: 31
Likes: 0
From: oc
Injector dynamics hands down
Reply
Old Jun 3, 2012 | 09:16 AM
  #4  
jameswwt's Avatar
Thread Starter
Evolved Member
 
Joined: Aug 2010
Posts: 1,426
Likes: 2
From: The Universe
Originally Posted by foxbear2277
I will be running ID but its not on your list... Out of the ones listed, every company I contacted about my build advised me and point me in the direction of FIC (Seccond to ID, companies pretty much told me if I want to save some money, go FIC over ID)
Thanks FoxBear
Reply
Old Jun 3, 2012 | 09:17 AM
  #5  
wjamyers's Avatar
Evolved Member
 
Joined: Feb 2008
Posts: 1,171
Likes: 1
From: Falls Church, VA
after my research for my needs (93octane) I decided FIC 1100 were a solid choice. work just like stock, only down side is they're loud enough to hear but that's only when you're standing over the engine so who cares?
Reply
Old Jun 3, 2012 | 09:19 AM
  #6  
jameswwt's Avatar
Thread Starter
Evolved Member
 
Joined: Aug 2010
Posts: 1,426
Likes: 2
From: The Universe
Originally Posted by EVOn9ne
Injector dynamics hands down
Thanks EVOn9ne
Reply
Old Jun 3, 2012 | 09:20 AM
  #7  
jameswwt's Avatar
Thread Starter
Evolved Member
 
Joined: Aug 2010
Posts: 1,426
Likes: 2
From: The Universe
Originally Posted by wjamyers
after my research for my needs (93octane) I decided FIC 1100 were a solid choice. work just like stock, only down side is they're loud enough to hear but that's only when you're standing over the engine so who cares?
Thanks Man...
Reply
Old Jun 3, 2012 | 10:47 AM
  #8  
jspecteggy's Avatar
Evolving Member
iTrader: (13)
 
Joined: Apr 2012
Posts: 135
Likes: 0
From: The Alamo
ID then FIC, like the one above said ID's are a bit more expensive. This link should help you some http://www.injectordynamics.com/ID10...d Time Summary Flow Rate and Dead Time Summary
Reply
Old Jun 3, 2012 | 11:26 AM
  #9  
Mellon Racing's Avatar
Account Disabled
iTrader: (38)
 
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
we've been having good luck with FIC for years now
Reply
Old Jun 3, 2012 | 11:49 AM
  #10  
Supergoslow's Avatar
Evolving Member
iTrader: (12)
 
Joined: Mar 2012
Posts: 254
Likes: 0
From: Jacksonville, NC
FIC's are your best bet for price and streetability. I had 1100's and they ran great on pump
Reply
Old Jun 3, 2012 | 12:47 PM
  #11  
boozeup&riot's Avatar
Evolved Member
iTrader: (12)
 
Joined: Feb 2005
Posts: 1,226
Likes: 1
From: you-taw
Many of the injectors on your list are all running the same core: the Bosch EV 14.
There are other entities offering these injectors too. One is a vendor here, Race Comp Engineering. The owner, Frank sold me a set for a fraction of the cost of ID's or FIC. before going in to my car this week, they'll be flow benched out here and tested to see how they behave. Another group, Fuel Injector Connection offered me a deal on the same set (Bosch EV 14) with plug and play adapters for a little over $300.00 shipped.

I'm not slamming any of these other vendors. Many people have great things to say about FIC and ID. I encourage you to look into the warm start issues affecting some of the people running ID. FIC seems to have treated many people as good, or better than the ID. Shop around, do some searching, you may find the injectors you want for much much less. Either way, no one has given you bad advice.

Last edited by boozeup&riot; Jun 3, 2012 at 12:49 PM.
Reply
Old Jun 3, 2012 | 01:16 PM
  #12  
spoilboy1's Avatar
Newbie
 
Joined: Jun 2007
Posts: 13
Likes: 0
From: Miami
Go with the Injector dynamics.
Reply
Old Jun 3, 2012 | 06:02 PM
  #13  
jameswwt's Avatar
Thread Starter
Evolved Member
 
Joined: Aug 2010
Posts: 1,426
Likes: 2
From: The Universe
Thank you so much Guys...
Reply
Old Jun 3, 2012 | 06:13 PM
  #14  
jameswwt's Avatar
Thread Starter
Evolved Member
 
Joined: Aug 2010
Posts: 1,426
Likes: 2
From: The Universe
Btw, by using s larger injector will it consume more fuel? Some say their car consume lesser fuel with a smaller cc injector compare to bigger injector with same power band.
Reply
Old Jun 3, 2012 | 06:15 PM
  #15  
jameswwt's Avatar
Thread Starter
Evolved Member
 
Joined: Aug 2010
Posts: 1,426
Likes: 2
From: The Universe
Originally Posted by Mellon Racing
we've been having good luck with FIC for years now
Hi Mellon Racing,
can i go for FIC 850cc injectors?

Thanks
Reply



All times are GMT -7. The time now is 05:15 AM.