Poor cold start, EDM 4G63
#1
Poor cold start, EDM 4G63
My IV has a USDM 260 ecu running an EDM Evo 8 engine. The engine started great the first try, even though it had 2 CEL's for the missing EGR. Once I disabled the EGR in the FAA and FCC periphery, the engine began to have trouble on cold starts.
The engine will maybe fire on 2 cylinders and then just continue cranking.
If I stop cranking exactly when it fires those couple times I can get it to start but it stumbles for 5-10 seconds until RPM raises to idle.
If I let it crank past those 2 little sparks, stop, and then continue cranking it starts perfect without turning 1 revolution; like it had compression, just didn't give fuel or spark.
To summarize: It starts fine but only if I turn the key twice.
The engine will maybe fire on 2 cylinders and then just continue cranking.
If I stop cranking exactly when it fires those couple times I can get it to start but it stumbles for 5-10 seconds until RPM raises to idle.
If I let it crank past those 2 little sparks, stop, and then continue cranking it starts perfect without turning 1 revolution; like it had compression, just didn't give fuel or spark.
To summarize: It starts fine but only if I turn the key twice.
Thread
Thread Starter
Forum
Replies
Last Post
fostytou
Evo How To Requests / Questions / Tips
338
Nov 10, 2023 11:55 AM
Hotsauce101
General Engine Management / Tuning Forum
0
May 14, 2015 09:50 PM
joel(PA)
Evo Engine / Turbo / Drivetrain
23
Mar 25, 2011 10:26 AM