Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Engine start help

Thread Tools
 
Search this Thread
 
Old Nov 2, 2013 | 07:43 PM
  #1  
cardiacdog's Avatar
Thread Starter
Newbie
 
Joined: Sep 2013
Posts: 2
Likes: 0
From: AL
Engine start help

Hey guys need some help. 2006 evo full track car. When trying to start car, I don't get any engine turnover. Just starter turning over. Tried to jump thinking battery wasn't strong enough with no luck. Pull/roll start in 2nd gear and it fires immediately but even after letting it get hot, if I shut it off I can't refire without a push/pull start
Thanks for any advice
Sean
Reply
Old Nov 2, 2013 | 08:27 PM
  #2  
barneyb's Avatar
Evolved Member
 
Joined: Jun 2006
Posts: 6,902
Likes: 151
From: Grand Island, NE
If the starter motor is running then the gear on the starter is not engaging the flywheel. In other words, broken starter. Fix or replace.
Reply
Old Nov 4, 2013 | 11:32 AM
  #3  
pinoyevo23's Avatar
Newbie
iTrader: (1)
 
Joined: Oct 2012
Posts: 15
Likes: 1
From: Bergenfield, NJ
The starters shot man. Had the same problem with myself. Replaced the starter and went on my way again
Reply
Old Nov 4, 2013 | 01:33 PM
  #4  
hiboost2.0's Avatar
Evolved Member
iTrader: (15)
 
Joined: Oct 2010
Posts: 641
Likes: 4
From: NJ
Yep if the starter is spinning but not engaging the flywheel, the solenoid on the starter motor is not doing it's job.
Reply
Old Nov 4, 2013 | 04:19 PM
  #5  
OhioWhiteEvo8's Avatar
Newbie
iTrader: (3)
 
Joined: Aug 2012
Posts: 72
Likes: 0
From: ohio
Yep I just replaced mine
Reply
Old Nov 5, 2013 | 04:26 AM
  #6  
cardiacdog's Avatar
Thread Starter
Newbie
 
Joined: Sep 2013
Posts: 2
Likes: 0
From: AL
Thanks for the input. Off to the shop today
Reply
Old Nov 5, 2013 | 07:26 AM
  #7  
OhioWhiteEvo8's Avatar
Newbie
iTrader: (3)
 
Joined: Aug 2012
Posts: 72
Likes: 0
From: ohio
If u have basic hand.tools do it yourself man pretty easy stuff
Reply
Old Nov 5, 2013 | 09:37 AM
  #8  
barneyb's Avatar
Evolved Member
 
Joined: Jun 2006
Posts: 6,902
Likes: 151
From: Grand Island, NE
Yeah, disconnect the battery, unbolt the exhaust in front and at the first hanger - two wires and two bolts on the starter if I remember it correctly.
Reply
Old Nov 5, 2013 | 11:30 AM
  #9  
OhioWhiteEvo8's Avatar
Newbie
iTrader: (3)
 
Joined: Aug 2012
Posts: 72
Likes: 0
From: ohio
Originally Posted by barneyb
Yeah, disconnect the battery, unbolt the exhaust in front and at the first hanger - two wires and two bolts on the starter if I remember it correctly.
You said it, if u are replacing with an oem part you won't have to even disconnect the downpipe but the aftermarket ones are about inch longer and won't allow you to get the new one in if aftermarket
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kmodo
04-06 Ralliart Engine/Drivetrain
2
Oct 8, 2016 12:51 AM
JHS VIII
Evo General
3
May 14, 2012 05:19 AM
Creamo3
Evo Engine / Turbo / Drivetrain
33
Oct 1, 2006 05:28 AM
jk_addict
Evo Engine / Turbo / Drivetrain
8
Nov 30, 2005 11:57 AM
Hungbee112
Evo Engine / Turbo / Drivetrain
7
Dec 22, 2004 10:10 PM




All times are GMT -7. The time now is 04:24 PM.