Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

EVO 8/9 Synchrotech Carbon Synchros

Thread Tools
 
Search this Thread
 
Old Jul 10, 2014 | 07:33 PM
  #181  
Yogi_B's Avatar
Evolved Member
 
Joined: Jul 2002
Posts: 630
Likes: 4
From: Auckland, New Zealand
I'll jump in for a set too.

1) Faisalm
2) powerdriver
3) NigHtcRawl3R
4) batty200
5) Sir2egk
6) D Grade
7) evodan2004
8) Raif
9) leecavturbo
10) CT9A PR (4 sets)
11) khmerpimpin
12)aggieEVO
13) Yogi_b
Reply
Old Jul 11, 2014 | 07:05 AM
  #182  
Synchrotech's Avatar
Thread Starter
Evolving Member
 
Joined: Jan 2014
Posts: 100
Likes: 5
From: San Dimas
07/11/14 Update:

We ordered the tooling for 1st-2nd carbon synchros for the EVO 5 speed 4-7 and 8-9 . We will have the complete 1-5 sets available in a few months.

The MSRP will be $349.95 and everyone on the waiting list will get a 20% discount on the set
Reply
Old Jul 11, 2014 | 07:45 AM
  #183  
EvoDan2004's Avatar
Evolved Member
iTrader: (94)
 
Joined: Feb 2005
Posts: 8,984
Likes: 8
From: New Jersey
Originally Posted by Synchrotech
07/11/14 Update:

We ordered the tooling for 1st-2nd carbon synchros for the EVO 5 speed 4-7 and 8-9 . We will have the complete 1-5 sets available in a few months.

The MSRP will be $349.95 and everyone on the waiting list will get a 20% discount on the set
Awesome. I'm in for all of them.
Reply
Old Jul 11, 2014 | 07:47 AM
  #184  
Ev0ikon's Avatar
Evolved Member
iTrader: (18)
 
Joined: Jan 2004
Posts: 3,677
Likes: 11
From: 3rd Rock {from = sun}
Originally Posted by Synchrotech
07/11/14 Update:

We ordered the tooling for 1st-2nd carbon synchros for the EVO 5 speed 4-7 and 8-9 . We will have the complete 1-5 sets available in a few months.

The MSRP will be $349.95 and everyone on the waiting list will get a 20% discount on the set
In for a complete set. Please add me to the list!
Reply
Old Jul 11, 2014 | 08:06 AM
  #185  
Faisalm's Avatar
Evolved Member
 
Joined: Apr 2011
Posts: 851
Likes: 2
From: US
That's good value for a promising product
Reply
Old Jul 11, 2014 | 08:17 AM
  #186  
Evolution7GSR's Avatar
Evolving Member
iTrader: (11)
 
Joined: Jul 2003
Posts: 251
Likes: 0
From: Boulder/Denver Colorado
put me down for a full set
Reply
Old Jul 11, 2014 | 08:43 AM
  #187  
llDemonll's Avatar
Evolved Member
iTrader: (21)
 
Joined: Jan 2011
Posts: 3,231
Likes: 99
From: Washington
So Question, because I'm not super-technical:

before you stated that the 1-2 synchro inner ring where the carbon goes was too thin to be "structurally sound", which is why the 3-5 were the only ones you were offering for a bit. You said you were going to do 1-2 out of steel instead of brass. Is this still true? are there benefits / drawbacks to steel vs. brass synchros?
Reply
Old Jul 11, 2014 | 08:58 AM
  #188  
powerdriver's Avatar
Evolving Member
 
Joined: Dec 2010
Posts: 221
Likes: 0
From: USA
I'm in for the complete set as well. I'm second on the wait list as it stands.
Reply
Old Jul 11, 2014 | 10:20 AM
  #189  
kaj's Avatar
kaj
EvoM Community Team Leader
20 Year Member
Liked
Loved
Community Favorite
iTrader: (60)
 
Joined: Mar 2006
Posts: 13,634
Likes: 824
From: Fresno, CA
I'll purchase a set, if you decide to make them for the 6spd.
Reply
Old Jul 11, 2014 | 12:57 PM
  #190  
nirvancol's Avatar
Evolving Member
iTrader: (11)
 
Joined: Feb 2005
Posts: 263
Likes: 6
From: PA
Originally Posted by kaj
I'll purchase a set, if you decide to make them for the 6spd.
Same here.
Reply
Old Jul 11, 2014 | 03:57 PM
  #191  
RSMike's Avatar
EvoM Guru
Photogenic
Photoriffic
Shutterbug
iTrader: (1)
 
Joined: Jul 2009
Posts: 2,276
Likes: 372
From: New Zealand
I'm keen for a full set, 1-5 gears.
Cheers, Mike
Reply
Old Jul 11, 2014 | 04:24 PM
  #192  
Synchrotech's Avatar
Thread Starter
Evolving Member
 
Joined: Jan 2014
Posts: 100
Likes: 5
From: San Dimas
Originally Posted by llDemonll
So Question, because I'm not super-technical:

before you stated that the 1-2 synchro inner ring where the carbon goes was too thin to be "structurally sound", which is why the 3-5 were the only ones you were offering for a bit. You said you were going to do 1-2 out of steel instead of brass. Is this still true? are there benefits / drawbacks to steel vs. brass synchros?
On the 4-7 we are using brass on the inner synchro because it is only a dual cone design. The 8-9 is a triple cone which we are using steel on the inner ring because brass would not be strong enough with the thickness required for the carbon lining. The steel inner body is stronger and more expensive to make but is the only option that will work on the 8-9.
Reply
Old Jul 11, 2014 | 09:12 PM
  #193  
Synchrotech's Avatar
Thread Starter
Evolving Member
 
Joined: Jan 2014
Posts: 100
Likes: 5
From: San Dimas
1-5 set for 5 speed Evo 4-7 & 8-9 waiting list - add your name

1) Faisalm
2) powerdriver
3) NigHtcRawl3R
4) batty200
5) Sir2egk
6) D Grade
7) evodan2004
8) Raif
9) leecavturbo
10) CT9A PR (4 sets)
11) khmerpimpin
12)aggieEVO
13) Yogi_b
14)Ev0ikon
15)Evolution7GSR
16) RSMike
17)JJUNTHO
Reply
Old Jul 11, 2014 | 09:27 PM
  #194  
Sir2egk's Avatar
Newbie
 
Joined: Dec 2011
Posts: 34
Likes: 0
From: Houston
Cool, can't wait. As soon as it's out I'll do a video on install and comparison vs oem
Reply
Old Jul 12, 2014 | 12:04 PM
  #195  
foxbear2277's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2009
Posts: 700
Likes: 0
From: canada
1) Faisalm
2) powerdriver
3) NigHtcRawl3R
4) batty200
5) Sir2egk
6) D Grade
7) evodan2004
8) Raif
9) leecavturbo
10) CT9A PR (4 sets)
11) khmerpimpin
12)aggieEVO
13) Yogi_b
14)Ev0ikon
15)Evolution7GSR
16) RSMike
17)JJUNTHO
18)foxbear2277
Reply



All times are GMT -7. The time now is 08:24 AM.