Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Exedy twin to tripple question

Thread Tools
 
Search this Thread
 
Old Jan 26, 2015 | 06:42 PM
  #1  
evo1008's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Sep 2010
Posts: 108
Likes: 0
From: new york
Exedy twin to tripple question

Hello so I converted my twin to a tripple everything is brand new exept the front cover the pedal is adjusted pretty high there is about an inch and half play at the top and it catches close to the floor is it normal for the pedal to be high .... If I lower the pedal it does not engage that well.

Last edited by evo1008; Jan 27, 2015 at 03:28 AM.
Reply
Old Jan 26, 2015 | 07:41 PM
  #2  
jacked cobra's Avatar
Newbie
 
Joined: Dec 2010
Posts: 29
Likes: 0
From: ny
I'm about to go from a twin to triple also. Please post any results
Reply
Old Jan 27, 2015 | 07:43 AM
  #3  
evo1008's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Sep 2010
Posts: 108
Likes: 0
From: new york
Bump
Reply
Old Jan 27, 2015 | 08:37 PM
  #4  
evo1008's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Sep 2010
Posts: 108
Likes: 0
From: new york
Lightbulb

Anyone ?????
Reply
Old Jan 28, 2015 | 06:16 AM
  #5  
V8HAHA's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2006
Posts: 485
Likes: 1
From: Tucson
From my experience with my triple its common. I converted a few months ago and adjusted the pedal high as well as adjusted under the hood. The clutch engages pretty low. I haven had any issues with dragging and the clutch grabs hard.
Reply
Old Jan 28, 2015 | 06:43 AM
  #6  
Ev0ikon's Avatar
Evolved Member
iTrader: (18)
 
Joined: Jan 2004
Posts: 3,677
Likes: 11
From: 3rd Rock {from = sun}
Front cover replacement cured all of my clutch related issues. Just FYI.
Reply
Old Jan 28, 2015 | 03:28 PM
  #7  
evo1008's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Sep 2010
Posts: 108
Likes: 0
From: new york
I took the tranny off like 6 times lol can I leave it the way it is?
Reply
Old Jan 28, 2015 | 04:22 PM
  #8  
silverofs's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2004
Posts: 561
Likes: 0
From: s.l.c ut
my pp disk was warped badly on mine after I replaced it mine engages normal I bet your is warped. my adjustment was all the way out and would barely release the disks fyi
Reply
Old Jan 28, 2015 | 04:39 PM
  #9  
evo1008's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Sep 2010
Posts: 108
Likes: 0
From: new york
Everything is brand new exept the front cover
Reply
Old Jan 28, 2015 | 06:58 PM
  #10  
Ev0ikon's Avatar
Evolved Member
iTrader: (18)
 
Joined: Jan 2004
Posts: 3,677
Likes: 11
From: 3rd Rock {from = sun}
Originally Posted by evo1008
Everything is brand new exept the front cover
Did you read my previous post? The front cover was my problem. It was warped. Replaced and it cured all my shifting problem.
Reply
Old Jan 28, 2015 | 07:19 PM
  #11  
evo1008's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Sep 2010
Posts: 108
Likes: 0
From: new york
Yea I read it I will try that
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
evotris
Automotosports - Illinois
3
Nov 29, 2012 06:13 AM
EvoPower81
For Sale - Wanting To Buy (WTB) Or Trade (WTT)
2
Nov 8, 2011 05:39 PM
DKC6691
Evo Engine / Turbo / Drivetrain
15
Jun 22, 2011 07:19 PM
N33d4sp33d
Evo Engine / Turbo / Drivetrain
36
May 25, 2010 06:09 PM
Gavin@TopLevelPerformance
Vendor 'Used Parts' Classifieds
6
Aug 19, 2009 09:46 AM




All times are GMT -7. The time now is 11:14 AM.