Evo 8 block for evo 4
#1
Newbie
Thread Starter
Join Date: Apr 2014
Location: San Jose
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Evo 8 block for evo 4
Sorry to resurrect old questions but I needed a definitive answer...I found an evo 8 block for sale locally and wanted to know if the evo 8 block will bolt up to the evo 4 head...
plan is to buy the 8 block and build both the evo 8 block and evo 4 head...will the evo 4 trans bolt up to the evo 8 motor?
Yes, I searched these current active threads:
https://www.evolutionm.net/forums/ev...gine-swap.html
https://www.evolutionm.net/forums/ge...t-evo-4-a.html
https://www.evolutionm.net/forums/ev...sfer-case.html
https://www.evolutionm.net/forums/ev...different.html
This was the closest thing I got to an answer in another thread
Also some other information that may be useful to future users from other threads
plan is to buy the 8 block and build both the evo 8 block and evo 4 head...will the evo 4 trans bolt up to the evo 8 motor?
Yes, I searched these current active threads:
https://www.evolutionm.net/forums/ev...gine-swap.html
https://www.evolutionm.net/forums/ge...t-evo-4-a.html
https://www.evolutionm.net/forums/ev...sfer-case.html
https://www.evolutionm.net/forums/ev...different.html
This was the closest thing I got to an answer in another thread
I have a friend who put an EVO 7 engine into his EVO 4, it was a straight forward swap. All he put in was the block and the head and just used all the other components from the EVO 4 engine. The hp gain wasn't huge but there was a bit of torque increase. His car was noticeably quicker.
I would imagine the 8 wouldn't be much different. It's still a good idea to bring across the turbo and ecu for better gains.
I would imagine the 8 wouldn't be much different. It's still a good idea to bring across the turbo and ecu for better gains.
Last edited by LJ7two4; Jan 11, 2018 at 10:43 PM.
#2
Evolved Member
iTrader: (1)
Sorry to resurrect old questions but I needed a definitive answer...I found an evo 8 block for sale locally and wanted to know if the evo 8 block will bolt up to the evo 4 head...
plan is to buy the 8 block and build both the evo 8 block and evo 4 head...will the evo 4 trans bolt up to the evo 8 motor?
Yes, I searched these current active threads:
https://www.evolutionm.net/forums/ev...gine-swap.html
https://www.evolutionm.net/forums/ge...t-evo-4-a.html
https://www.evolutionm.net/forums/ev...sfer-case.html
https://www.evolutionm.net/forums/ev...different.html
This was the closest thing I got to an answer in another thread
Also some other information that may be useful to future users from other threads
plan is to buy the 8 block and build both the evo 8 block and evo 4 head...will the evo 4 trans bolt up to the evo 8 motor?
Yes, I searched these current active threads:
https://www.evolutionm.net/forums/ev...gine-swap.html
https://www.evolutionm.net/forums/ge...t-evo-4-a.html
https://www.evolutionm.net/forums/ev...sfer-case.html
https://www.evolutionm.net/forums/ev...different.html
This was the closest thing I got to an answer in another thread
Also some other information that may be useful to future users from other threads
Evo 4-8 its the same. Even, evo 9 block fit in evo 4-8 head make a little adjustments in the block.
#3
Newbie
Thread Starter
Join Date: Apr 2014
Location: San Jose
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
#6
Evolved Member
it has different type of thrust bearing.... it is single piece main and thrust bearing and it usually goes bad when dealing with uprated clutches. Later blocks had separate thrust bearings..
Thread
Thread Starter
Forum
Replies
Last Post
GSX_TO_EVO
For Sale/WTB - Engine / Drivetrain / Power
1
Nov 21, 2016 06:44 PM
Knguyen228
Evo Engine / Turbo / Drivetrain
10
Jun 11, 2009 03:28 PM
Johnboy1065
Evo Engine / Turbo / Drivetrain
4
Apr 22, 2009 03:42 AM
ralliartjapracr
04-06 Ralliart General
6
Sep 27, 2004 02:18 PM