External Fuel pump wiring
External Fuel pump wiring
Hey guys and gals, I'm trying to find out what the beat way is to wire my external fuel pumps. I have a 340lph in tank pushing to my surge tank and then I have two external magnafuel pumps pushing from the surge to the rail. I'm trying to find the best way to wire them and what wires to go off of. Thanks for the help guys.
Account Disabled
Joined: Mar 2013
Posts: 714
Likes: 22
From: in a garage
There's lots of ways to do it.
Probably why no one's answered.
You don't mention WHY? or what you're using it for.
Nor the size of the surge tank.
The stock pump with stock wiring should work OK as a lift pump.
If you're using 2 pumps for pressure then a PWM driver module is probably best .
You'll need to flow test and pressure test everything.
Probably why no one's answered.
You don't mention WHY? or what you're using it for.
Nor the size of the surge tank.
The stock pump with stock wiring should work OK as a lift pump.
If you're using 2 pumps for pressure then a PWM driver module is probably best .
You'll need to flow test and pressure test everything.
Thread
Thread Starter
Forum
Replies
Last Post
MisUnderStood
For Sale/WTB - Engine / Drivetrain / Power
6
Dec 16, 2015 08:53 AM
Carloverx
Evo Engine / Turbo / Drivetrain
14
Dec 22, 2011 01:00 PM