To anyone who is running this manifold what hardware did you use to mount this to the turbo? Are you using FP's $60 hardware kit or did you come up with your own solution?

Thanks

 

http://www.streettunedmotorsports.co...p_bolt_kit.htm

 

I don't think those will work. The FP bolts are longer.

http://store.forcedperformance.net/m...Lancer-Exhaust

 

ok

 

All stuff was ordered from Jegs and drop shipped from ARP...

ARP 300-8343 Replacement Nut x2 Jegs PN 070-300-8343 $4.00
12-Point Nut
Black Oxide
M10 x 1.25 Small Collar
12mm Socket Size
1 per pkg

ARP 663-1010 Bulk Metric Thread Chromemoly Bolts 80mm(pack of 5) Jegs PN 070-663-1010 $18.22
Black Oxide
M10 x 1.25
80mm UHL

Subtotal: $26.22
FREE Handling: $0.00
FREE Shipping: $0.00
Total: $26.22

 

Dammit I wish i saw this yesterday. I just gave in and ordered the FP hardware. Thanks for posting this. Hopefully this will help out people in the future.

 

I had posted it in another thread as well... also FYI the pack of 5 80mm bolts come with washers as well... so you can use 2 washers for the studs

 

I tried searching for this but I must have not seen your post. I wonder if FP will let me return it.

 

Perhaps, probably with a 20% restocking fee...

 

I would still be saving money. It cost me $72 for the hardware plus shipping.

 

It has been awhile since I took the turbo apart, does the turbo to manifold have 4 bolts in stock form, or 2 bolts and 2 studs?

 

I bought two longer bolts, two nuts, and a few washers at a local store, didn't cost all that much and works the same.

 

2 bolts and 2 studs

 

Thanks I ordered the ARP hardware you suggested .

 

No problem!