EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

help..

Thread Tools
 
Search this Thread
 
Old Apr 6, 2021 | 02:58 AM
Share
  #1  
SwabeLife's Avatar
SwabeLife
Thread Starter
Evolved Member
20 Year Member
Photogenic
Photoriffic
iTrader: (21)
 
Joined: Mar 2005
Posts: 2,088
Likes: 4
From: Instagram: SwabeLife
help..
Hello guys my question is when I go WOT 3rd gear rpm cuts at 6k rpm and i when I go WOT in 4th gear it rpm cuts at 5K rpm. any suggestions. car pulls strong its just the rpm restricts for going further. car mods build buschur 2.0LR, flex tuned I have e85 in the tank, haltech elite 2k pnp ecu, pte 6262 gen2 turbo. thanks in advance
Reply
0
Old Apr 6, 2021 | 08:24 AM
Share
  #2  
justboosted02's Avatar
justboosted02
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (31)
 
Joined: Jun 2006
Posts: 1,926
Likes: 14
From: northeast
do you have failsafes setup in the ECU?

AFR out of range?
Reply
0
Old Apr 6, 2021 | 04:30 PM
Share
  #3  
hutch959's Avatar
hutch959
Evolved Member
iTrader: (18)
 
Joined: Nov 2004
Posts: 1,459
Likes: 110
From: Chattanooga, TN
what boost level?

what plugs? what coils? what gap on plugs?
Reply
0
Old Apr 6, 2021 | 05:00 PM
Share
  #4  
SwabeLife's Avatar
SwabeLife
Thread Starter
Evolved Member
20 Year Member
Photogenic
Photoriffic
iTrader: (21)
 
Joined: Mar 2005
Posts: 2,088
Likes: 4
From: Instagram: SwabeLife
Originally Posted by justboosted02
do you have failsafes setup in the ECU?

AFR out of range?
14-16 afr. I do have failsafe in haltech 2k pnp ecu
Reply
0
Old Apr 6, 2021 | 06:00 PM
Share
  #5  
justboosted02's Avatar
justboosted02
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (31)
 
Joined: Jun 2006
Posts: 1,926
Likes: 14
From: northeast
Originally Posted by SwabeLife
14-16 afr. I do have failsafe in haltech 2k pnp ecu

something might be off with the car mechanically causing the ecu to protect the motor. You should most likely go see your tuner.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
any suggestions
SwabeLife
Evo Dyno Tuning / Results
3
Apr 23, 2021 07:29 AM
Car Stuttering/Jerking at Certain RPMS?
IREVO
Evo General
5
Dec 24, 2005 04:27 PM
Trouble getting consistent A/F ratios
PVD04
General Engine Management / Tuning Forum
5
Nov 8, 2004 01:31 PM
running richer in higher gears... cause of load points?
rt turbo
Evo Engine / Turbo / Drivetrain
17
Aug 5, 2004 05:37 AM
Back to Subforum
Evo Engine / Turbo / Drivetrain
View Next Unread
Rods & Pistons




Advanced Search

All times are GMT -7. The time now is 08:55 PM.