in a few days im going to get the hks turbo kit

anyone have an idea of how much horsepower im going to gain?

 

First a few questions.

which HKS kit? Why not go for a Garrett? They make the turbos for HKS. hks 3037=GT30R hks 3240 similar to GT35R. They are cheaper also!

On the power thing. 3037 is good for 500wbhp, 3240 has bin run upto 800bhp (on Norris Designs car here in the UK).

Chris.

 

gt3240 i had that one too its brilliant

or go for a garret gt35r its cheaper or a gt3040

 

I don't believe it! Moses .. is that you? This is evojemm from the MLR.
glad to have u over here !!

 

im yhinking about the hks GT3037S, people around me say it is the best turbo kit for my car.

 

*thinking

 

hi jemm my bros its me haha bros i hardly come on here been a member for ages

its too not uk for me thats the reason i hardly come on.

and nice to see u here bros and God bless, hope u had a cool weekend

and gt7 u wont regret it go for a gt3240 its the ultimate for track and drag racing

 

can any body give me a link to a Garrett turbo kit fot EVO 8 ??

 

a lot

 

evo toy see your sig my car was the exact replica of that one time

how much power do u want mate

u have a choice of alot of turbo's

i recommend the gt series


gt3037
gt3040
gt35r
gt3540
gt3542
gt42 with nos will take u near 1000 bhp

 

i think ill go for the gt3037s....

 

it's the most streetable out of all and also capable of 400whp on pump gas

 

why not just drop a 50 trim in there, very streetable

 

Moses. Can you give us a brake down of the bearings used in each of the turbos. Are they off the shelf or are they hybrids?

Oh yeah, there is a guy on here running a GT40 (!!!!!!) on his Evo.

thanks mate, Chris

 

I had the gt40- swapped it for a custom agp3052 garrett full bb. It flows 10% more than a 3037 hks an spools better. www.agpturbo.com.

Here is a link to the post for initial tune at 21 pounds: https://www.evolutionm.net/forums/sh...highlight=gt40

The turbo is a garrett gt series full dual bb and it is spooling at 1.5 bar by 3700. Still makes power to 8k + and it is $1200 I looked at the hks but the 3052 flows more and spools earlier. The agp is very similar to the33037 but a little more flow and better spool. If you add a sfp manifold for 400 and 200 for the tial wastegate, all you need is the o2 housing, a water cooling line and an oil cooling line for a "kit" that is 2k complete. If you want to get fancy, you still have 3k left over for other mods compared to going with the hks kit.