Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Full Intercooler piping around $300

Thread Tools
 
Search this Thread
 
Old Jul 9, 2004 | 09:39 PM
  #1  
MYEVOVIII's Avatar
Thread Starter
Evolved Member
iTrader: (35)
 
Joined: Mar 2003
Posts: 1,983
Likes: 0
From: Atl/Southeast
Full Intercooler piping around $300

I was popping around on E-bay and found this not sure if it had already been posted but I thought it was a good price compared to some of the other kits out now.

http://cgi.ebay.com/ebaymotors/ws/eB...category=38634
Reply
Old Jul 10, 2004 | 09:51 AM
  #2  
exhaust_note's Avatar
Evolved Member
iTrader: (4)
 
Joined: Mar 2003
Posts: 643
Likes: 0
From: South Jersey
I just did a search on RVM racing.. there is a website but they don't have anything for the evo.... its doesn't look half bad.. but i guess u get what u pay for...
Reply
Old Jul 10, 2004 | 10:08 AM
  #3  
DocMortal's Avatar
Evolving Member
iTrader: (5)
 
Joined: Jun 2003
Posts: 446
Likes: 0
From: Victorville CA
wow tempting and look pretty good...its hard to believe some of the prices for these pipes are....

Guys feedback is pretty bad careful

Last edited by DocMortal; Jul 10, 2004 at 10:16 AM.
Reply
Old Jul 10, 2004 | 10:12 AM
  #4  
Ang Wen Yan's Avatar
Evolved Member
 
Joined: Jun 2004
Posts: 2,552
Likes: 1
From: KL,Malaysia
Talking

Ohhhh......

Cheap price and look good!!!!!!!!!!What is the page?
Reply
Old Jul 10, 2004 | 10:49 AM
  #5  
naucrx's Avatar
Evolved Member
iTrader: (19)
 
Joined: May 2003
Posts: 1,406
Likes: 1
From: Columbus, OH
Good find! I just wish I had $320 to spare.
Reply
Old Jul 10, 2004 | 11:04 AM
  #6  
Blitzbaster02's Avatar
Evolving Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 427
Likes: 0
wow, looks pretty good. Ebay is the ****!
Reply
Old Jul 13, 2004 | 09:15 AM
  #7  
David Buschur's Avatar
Evolved Member
iTrader: (53)
 
Joined: Mar 2003
Posts: 14,622
Likes: 32
Our upper i/c pipe kit is only $330 in CNC mandrel bent polished stainless steel, eliminates a bunch of bends and pipe length and comes with the 1g BOV.

The FMIC kit we build also comes with the lower i/c plumbing at no extra charge.

Just wanted to point this out, sorry for hogging your topic.

David Buschur
www.buschurracing.com
Reply
Old Jul 13, 2004 | 09:23 AM
  #8  
BADEVO's Avatar
Evolved Member
iTrader: (35)
 
Joined: Dec 2003
Posts: 2,440
Likes: 0
From: Summerville SC
but do you still have to have a mini battery or reloacte the battery?
Reply
Old Jul 13, 2004 | 10:06 AM
  #9  
MO_EVO8's Avatar
Evolved Member
iTrader: (36)
 
Joined: Jun 2004
Posts: 529
Likes: 0
From: MO.
You..

Haft to have bushur mini batt. to run there u/i piping.
Reply
Old Jul 13, 2004 | 10:08 AM
  #10  
RSGuy's Avatar
Evolved Member
iTrader: (12)
 
Joined: Jun 2004
Posts: 1,261
Likes: 0
From: Orange County, CA
I would DEFINITELY go with Buschur Racing over this kit. Better safe than sorry. I plan on getting this for my RS when I get some more cash flow.
Reply
Old Jul 13, 2004 | 10:11 AM
  #11  
alex_alex's Avatar
Evolved Member
iTrader: (7)
 
Joined: Jul 2003
Posts: 1,993
Likes: 0
From: Los Angeles
Originally Posted by davidbuschur
Our upper i/c pipe kit is only $330 in CNC mandrel bent polished stainless steel, eliminates a bunch of bends and pipe length and comes with the 1g BOV.

The FMIC kit we build also comes with the lower i/c plumbing at no extra charge.

Just wanted to point this out, sorry for hogging your topic.

David Buschur
www.buschurracing.com
I think it was conveniently left out that you need to sink another $225 in the hole to run this upper pipe at $330.
Reply
Old Jul 13, 2004 | 10:17 AM
  #12  
Eric Lyublinsky's Avatar
Evolved Member
iTrader: (5)
 
Joined: Mar 2003
Posts: 2,218
Likes: 0
From: Tri-State
Originally Posted by davidbuschur
Our upper i/c pipe kit is only $330 in CNC mandrel bent polished stainless steel, eliminates a bunch of bends and pipe length and comes with the 1g BOV.

The FMIC kit we build also comes with the lower i/c plumbing at no extra charge.

Just wanted to point this out, sorry for hogging your topic.

David Buschur
www.buschurracing.com

But your require the mini battary kit to fit the piping witch would be a added expense.

The UR kit is very nice with t-bolt clamps for 500 bucks
Reply
Old Jul 13, 2004 | 10:23 AM
  #13  
Karash's Avatar
Evolved Member
iTrader: (6)
 
Joined: May 2003
Posts: 1,274
Likes: 1
From: Okie in PHX
and I dotn think the BR works with the stock airbox does it?
Reply
Old Jul 13, 2004 | 10:30 AM
  #14  
caymandiver75's Avatar
Evolved Member
iTrader: (1)
 
Joined: Jun 2003
Posts: 581
Likes: 0
From: NOVA
no the IC piping/mini battery kit does not work with the stock airbox.
Reply
Old Jul 14, 2004 | 08:10 PM
  #15  
MYEVOVIII's Avatar
Thread Starter
Evolved Member
iTrader: (35)
 
Joined: Mar 2003
Posts: 1,983
Likes: 0
From: Atl/Southeast
I still think for the money it is a good buy thats all I was saying. And from the looks of it you wont have to relocate your battery or buy a smaller replacement.
Reply



All times are GMT -7. The time now is 09:51 AM.