I know 98% of you guys here use the HKS 264's and 272's, and some even the Pipers and Jun cams, but I must say theres a new player in the game. I installed what Brian Crower said was the closest to the 264/272 combo (part number 64432-2) and I am extremely impressed how these cams have gained my top end, yet didnt sacrifice any of my low end power. They have a choppy idle, but will idle without a flash and not cause any drivability problems. Of course with a tune/flash they can idle like stock.

I'd also like to add that Jason Harrison at Redlinepower.com was very helpfull and courteous in helping me select my cams and getting them to me while keeping me updated. Not to mention got me a AWSOME price on em. Definately would recomend him to anyone.

Bottom line, consider the Crower's as a power player in the cam selcetion for your Evo!!!

 

where'd you pick em up and how much?

 

/\ yea

 

i think price plays a big roll in most evo owners' minds when it comes to cams...

 

i think price plays a roll when it comes to most consumers...

 

cam profile is most important to me, any info you have like the lift?

 

Yes, do tell us more...

 

what's the duration and lift?

 

Crower lists the pair for $568.91. No other info is available.

 

what's the crower webpage?

::edit:: nm

 

Any dyno graphs, prior experience with other cams ? Just curious ...

 

www.crower.com ... the only listed cams are for the older turbo charged 2g eclipse/talon.

 

Yes, they dont have them listed on their website yet. However if you type in the part number (64432-2) into the part number search its there. I havent had any expierence with other cams in my evo, but have in other 4g63 powered cars. My cam card is out in the garage, Ill post spec's in a few.

I picked mine up from Jason at RedlinePerformance.com. I will say that he got them for me for ALOT less than list price!!

 

Stage 1- Street use and more aggressive turbo and nitrous. Slight lope at idle. RPM Range:idle to 7500+ PN 64431-2

Stage 2- Combination Stage 2 intake and Stage 1 exhaust (264/272 combo). RPM Range: Idle to 7750. PN 64432-2

Stage 2.5- Most popular profile for street/strip. Excellent all purpose turbo. RPM Range:1000 to 8000. PN 64433-2

Stage 3- Race Profile- Recommended for mostly strip use. Rough idle, springs required. RPM Range:1100 to 8250++ PN 64434-2

Here is what I haev found out about them. No lift or duration yet.

Ben

 

scan that cam card