EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

All Part Number Request Go Here

Thread Tools
 
Search this Thread
 
Old Aug 7, 2009 | 10:51 AM
Share
  #3106  
Rob_GPT's Avatar
Rob_GPT
Evolving Member
iTrader: (1)
 
Joined: Jun 2005
Posts: 213
Likes: 0
From: Gulfport MS
Originally Posted by DOUGLAS
I need the all of the nuts/bolts for the front stock strut tower.....the two that connect to the firewall and all of the nuts on the strut towers......I also need a number/price on the plastic gate under the driver side dash that holds the bunch of wireharness wires up under the dash.....
The strut tower brace attaches with the same bolts that hold the strut in so all you should need is the 2 on the firewall.
Reply
0
Old Aug 8, 2009 | 12:39 PM
Share
  #3107  
DOUGLAS's Avatar
DOUGLAS
Evolving Member
iTrader: (19)
 
Joined: Jul 2008
Posts: 235
Likes: 0
From: NW Ohio
I know this but I want to replace them along with some other hardware that is corroded......
Reply
0
Old Aug 8, 2009 | 12:53 PM
Share
  #3108  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by DOUGLAS
I need the all of the nuts/bolts for the front stock strut tower.....the two that connect to the firewall and all of the nuts on the strut towers......I also need a number/price on the plastic gate under the driver side dash that holds the bunch of wireharness wires up under the dash.....
Im not sure exactly what you are after for the wiring and I dont see anything that makes me feel confident that its what you want.

Here is a link for the strut bar parts.

LINK
http://www.mitsubishiparts.net/cart/...2*2+mf434105*6
Reply
0
Old Aug 8, 2009 | 12:55 PM
Share
  #3109  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by Rob_GPT
front CV joint seals at the t-case?
Am I wrong by thinking you have one in the transfer case and one in the transmission case? Either way Im giving a you link with the transfer case, transfercase to transmission and transmission to axle seal. Hopefully that makes sense.

LINK
http://www.mitsubishiparts.net/cart/...80100+MD758763
Reply
0
Old Aug 8, 2009 | 12:58 PM
Share
  #3110  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by MadCrix
hi guys any part number?
You cannot buy that by itself. You have to buy the oil temp gauge to get the drain plug w/ sensor.
Reply
0
Old Aug 8, 2009 | 12:59 PM
Share
  #3111  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by drop24
Part numbers for the IX GSR plastic undertray plus and clips needed?

LINK
http://www.mitsubishiparts.net/cart/...79+MB547806*36
Reply
0
Old Aug 8, 2009 | 01:03 PM
Share
  #3112  
RockmanX's Avatar
RockmanX
Evolved Member
iTrader: (78)
 
Joined: Aug 2008
Posts: 6,623
Likes: 4
From: Louisiana
russell can you pm me about getting anew water pump for my engine build and a complete new gasket set just collecting data
Reply
0
Old Aug 8, 2009 | 01:55 PM
Share
  #3113  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by RockmanX
russell can you pm me about getting anew water pump for my engine build and a complete new gasket set just collecting data
pm Sent
Reply
0
Old Aug 11, 2009 | 08:04 PM
Share
  #3114  
alexisrc's Avatar
alexisrc
Evolving Member
iTrader: (7)
 
Joined: Jun 2008
Posts: 108
Likes: 0
From: puerto rico
parts number
Hi guys.
I want to let everybody to know that I own a Mitsubishi Parts Book with all parts numbers. Just ask for them!
Reply
0
Old Aug 12, 2009 | 12:45 AM
Share
  #3115  
Xionicfire's Avatar
Xionicfire
Newbie
 
Joined: May 2009
Posts: 4
Likes: 0
From: Laredo, Texas
what i want to know is where did you come across such a book!?!?!? and in that subject, would you be willing to sell it? or another copy of it you might run across? i would pay top dollar for that book (Evo 9 MR Worldwide)
Reply
0
Old Aug 13, 2009 | 09:09 AM
Share
  #3116  
Rob_GPT's Avatar
Rob_GPT
Evolving Member
iTrader: (1)
 
Joined: Jun 2005
Posts: 213
Likes: 0
From: Gulfport MS
Originally Posted by RussellM
Am I wrong by thinking you have one in the transfer case and one in the transmission case? Either way Im giving a you link with the transfer case, transfercase to transmission and transmission to axle seal. Hopefully that makes sense.

LINK
http://www.mitsubishiparts.net/cart/...80100+MD758763
That's what I need. This will be my third or fourth order. You guys are great! KEEP IT UP!
Reply
0
Old Aug 15, 2009 | 08:38 PM
Share
  #3117  
EKSiR99's Avatar
EKSiR99
Newbie
 
Joined: Aug 2009
Posts: 1
Likes: 0
From: philippines
Originally Posted by alexisrc
Hi guys.
I want to let everybody to know that I own a Mitsubishi Parts Book with all parts numbers. Just ask for them!

nice to know that mate, ill give you a PM regarding some parts. thanks
Reply
0
Old Aug 21, 2009 | 10:39 AM
Share
  #3118  
JJsEvo8's Avatar
JJsEvo8
Evolved Member
iTrader: (6)
 
Joined: Apr 2007
Posts: 703
Likes: 0
From: USA
I need the gasket that goes between the turbo and the oil return line. Anybody have a part # for that?
Reply
0
Old Aug 22, 2009 | 06:59 AM
Share
  #3119  
Rob_GPT's Avatar
Rob_GPT
Evolving Member
iTrader: (1)
 
Joined: Jun 2005
Posts: 213
Likes: 0
From: Gulfport MS
grrr.... that was the correct seal for the transfer case... Which leads me to...

PN for a new passanger side from CV joint? That little metal sleeve is bent a little and i'm having problems getting it correct.
Reply
0
Old Aug 24, 2009 | 07:35 AM
Share
  #3120  
MadCrix's Avatar
MadCrix
Evolving Member
iTrader: (6)
 
Joined: Apr 2007
Posts: 115
Likes: 0
From: Trinidad, West Indies
Originally Posted by RussellM
You cannot buy that by itself. You have to buy the oil temp gauge to get the drain plug w/ sensor.
cost?
Reply
0



Advanced Search

All times are GMT -7. The time now is 10:07 PM.