All Part Number Request Go Here

Reply Subscribe

Thread Tools

Search this Thread

May 29, 2006 | 12:55 PM

#1081

SuperHatch

Evolved Member

iTrader: (23)

Joined: Mar 2004

Posts: 2,044

Likes: 0

From: NJ

Quote:

Originally Posted by kErViOsVIII

does anyone know the P/N for the smaller of the 2 covers for the fuse box under the hood?

MR502417

May 29, 2006 | 12:56 PM

#1082

SuperHatch

Evolved Member

iTrader: (23)

Joined: Mar 2004

Posts: 2,044

Likes: 0

From: NJ

Quote:

Originally Posted by Sap12687

How about tranny bolts on an VIII

2 x MF140268
2 x MF140270
1 x MF140722

May 30, 2006 | 01:27 PM

#1083

KevOVIII

Evolving Member

iTrader: (10)

Joined: Aug 2005

Posts: 246

Likes: 0

From: San Francisco, CA

Quote:

Originally Posted by SuperHatch

MN143305 - Return
MD363253 - Feed

Thank you.

May 30, 2006 | 07:21 PM

#1084

dryad001

Evolved Member

iTrader: (27)

Joined: Nov 2003

Posts: 2,123

Likes: 1

From: Oak Creek, WI

Im looking for the PN for the lower control arm bolt that rides next to the lower ball joint through the spindle.

The threads are gone on both bolts, found this out while the tranny is out.

May 31, 2006 | 01:53 PM

#1085

t-dotlancer

Evolving Member

Joined: Nov 2002

Posts: 135

Likes: 0

From: toronto

MR444269 Trim, Trunk room RR end (Grey)

is this the complete trunk liners, both sides, and the carpet????

Jun 2, 2006 | 01:13 PM

#1086

SuperHatch

Evolved Member

iTrader: (23)

Joined: Mar 2004

Posts: 2,044

Likes: 0

From: NJ

Quote:

Originally Posted by t-dotlancer

MR444269 Trim, Trunk room RR end (Grey)

is this the complete trunk liners, both sides, and the carpet????

No...

MR572601 - Left side
MR572602 - Right side
MR444269 - Rear panel
MR572609 - Trunk floor

Jun 2, 2006 | 01:16 PM

#1087

SuperHatch

Evolved Member

iTrader: (23)

Joined: Mar 2004

Posts: 2,044

Likes: 0

From: NJ

Quote:

Originally Posted by dryad001

Im looking for the PN for the lower control arm bolt that rides next to the lower ball joint through the spindle.

The threads are gone on both bolts, found this out while the tranny is out.

MU140029 - Bolt
MU431006 - Nut

P.S. - This is the bolt that holds the knuckle to the lower ball joint.... It pinches the spindle onto the joint. I hope that's the bolt you're talking about...

- Steve

Jun 5, 2006 | 07:13 AM

#1088

sonicnofadz

Evolved Member

iTrader: (4)

Joined: Jan 2006

Posts: 2,726

Likes: 3

From: Baltimore, MD

I'm looking for the part number for the section of the wiring harness that connects to both the speedometer and the reverse light switch on the transmission. (it detaches from the rest of the wiring harness)

Jun 7, 2006 | 07:46 AM

#1089

sonicnofadz

Evolved Member

iTrader: (4)

Joined: Jan 2006

Posts: 2,726

Likes: 3

From: Baltimore, MD

Whoops the part number was actually posted on a tag connected to this wire. It is called the transmission wiring harness part # MN151-578

Quote:

Originally Posted by sonicnofadz

Jun 7, 2006 | 04:02 PM

#1090

Nesiop

Evolved Member

iTrader: (25)

Joined: Aug 2003

Posts: 1,557

Likes: 1

From: Mass

Look for the part number for the retainer clip/snap ring/Wave washer between TOB and Pressure plate. I hear it is the same part as Mitsu.

This is from my Cusco Twin plate.

http://putfile.com/pic.php?pic=5/15018415396.jpg&s=f5

http://putfile.com/pic.php?pic=5/15018405468.jpg&s=f5

http://putfile.com/pic.php?pic=5/15018384085.jpg&s=f5

http://putfile.com/pic.php?pic=5/15018392122.jpg&s=f5

Jun 8, 2006 | 07:16 AM

#1091

Nesiop

Evolved Member

iTrader: (25)

Joined: Aug 2003

Posts: 1,557

Likes: 1

From: Mass

Quote:

Originally Posted by Nesiop

Anyone?

Jun 8, 2006 | 08:22 AM

#1092

SuperHatch

Evolved Member

iTrader: (23)

Joined: Mar 2004

Posts: 2,044

Likes: 0

From: NJ

Wait til I get home from work today, I'll give a looksie. I don't have caps at work.

Jun 8, 2006 | 02:35 PM

#1093

SuperHatch

Evolved Member

iTrader: (23)

Joined: Mar 2004

Posts: 2,044

Likes: 0

From: NJ

Quote:

Originally Posted by Nesiop

Those part numbers are not listed individually in vincaps. I'm not sure how your friend can get them, but that might be your only option.

Jun 8, 2006 | 03:19 PM

#1094

Nesiop

Evolved Member

iTrader: (25)

Joined: Aug 2003

Posts: 1,557

Likes: 1

From: Mass

What would they be listed under then? Like how could he even look them up? His diagram on Mitsus part finder at his desk doesn't show the parts.

Jun 8, 2006 | 08:15 PM

#1095

SuperHatch

Evolved Member

iTrader: (23)

Joined: Mar 2004

Posts: 2,044

Likes: 0

From: NJ

Right, my exploded diagram doesn't show those parts either... I dont know how to get them, sorry.