Fastest Evo8 MR in the country!!
I can't imagine what it will do with more boost 
If you are spinning, simply lower the tire pressure. Iam gonna guess you were at 30psi? 32ish?
Try lowering it to around 20-23 front, and 23-25 rear.
Oh and how many times do/have you launched? Because with that much power id maybe be putting some money aside for a new clutch.
Try lowering it to around 20-23 front, and 23-25 rear.
Oh and how many times do/have you launched? Because with that much power id maybe be putting some money aside for a new clutch.
Newbie
Joined: Dec 2004
Posts: 4
Likes: 0
Originally Posted by DahakaJR
He crossing in 6th.. I tried counting.. I might have messed up.
.
Originally Posted by 13brewtt
Always solder, you should never use horrible crimp connects on any reference signal wires that have anything to do with ECU communication.
I have run this turbo kit to 34.5psi w/ out maxing out the MAF which yielded 494whp/430tq. Apexi rates it up to 39psi, but I think that is w/ a bigger hotside. Its good to see another person w/ this turbo kit 
.
.
Last edited by jj_008; Mar 15, 2006 at 01:40 PM.
Account Disabled
Joined: Feb 2006
Posts: 190
Likes: 0
You have the most obscure Turbo Kit out there, and expensive too. More info on that please? Thanks
It looks real nice but I know NOTHING of the IHI turbo it runs. All I know of IHI is the VF-34, 30, 22 and so on. This is the IHI RX6 TCW77 P20 Ball Bearing Turbocharger. Prices range from $4900-$6600 so it isn't cheap either.
It looks real nice but I know NOTHING of the IHI turbo it runs. All I know of IHI is the VF-34, 30, 22 and so on. This is the IHI RX6 TCW77 P20 Ball Bearing Turbocharger. Prices range from $4900-$6600 so it isn't cheap either.
Last edited by FahKen Evo!; Mar 15, 2006 at 01:58 PM.
Evolved Member
Joined: Mar 2006
Posts: 555
Likes: 0
From: Davao City, Philippines
11.4 only??? oh common u can do better than that! the Autoplus Euro-spec MR did 9.8 secs. Go check the fastest Evo list in the drag forums. oh anyway, goodluck in going for more power!
Originally Posted by BadazzCR
To my knowledge this is the quickest MR in the country right now. Its my friends car... who is also the the owner of MZM in Texas.
MODS: Apexi turbo kit, turbo back exhaust, hks cams, Ecutek'd stock ecu(MZM tuned).
Everything else is stock... stock clutch, intake,block,tranny etc.. this car is still full weight, even made the run with the spare tire in the car. Car was run on 105 unleaded race gas. He is going to the track tonight and turning the boost up hoping for a faster time with a better sixty foot.
http://www.tracdaze.com/mzm_evo_11.4.wmv
MODS: Apexi turbo kit, turbo back exhaust, hks cams, Ecutek'd stock ecu(MZM tuned).
Everything else is stock... stock clutch, intake,block,tranny etc.. this car is still full weight, even made the run with the spare tire in the car. Car was run on 105 unleaded race gas. He is going to the track tonight and turning the boost up hoping for a faster time with a better sixty foot.
http://www.tracdaze.com/mzm_evo_11.4.wmv
Please join us at www.evolutionmr.net.
That is a very fast MR, please elaborate more on his mods. Thanks and congratulations to that guy, he is flying..!!
Carlos
Last edited by fromWRXtoEVO; Mar 15, 2006 at 08:40 PM.