Boosting 11psi removed MBC
Boosting 11psi removed MBC
I removed my MBC and hooked up the factory lines... Car is only boosting 11psi now. VERY ODD! I have 1 vaccum line going from the boost selenoid to the intake, and the other goes from the selenoid to the compressor housing/wastegate actualtor (both on that 1 line). Seem right???
ideas?
Pics of factory setup?
ideas?
Pics of factory setup?
Are you using the factory lines that it came with or just ordinary vacuum lines? Because you NEED to reuse the factory lines as they contain restrictor pills to achieve those boost levels.
This is good information. I honestly had no idea there were "restrictor pills" in the lines. I am useing mostly facotry line except the line that was on the Compressor housing broke on me taking it off, it was fried on basically. I am now using a small aftermarket line for that, and the rest is factory.
Trending Topics
Pinch the hose down the line and feel for a small round pill. If you don't have them, you can order the whole set from http://www.mitsubishiparts.net for like $20 bucks or so.
It's as simple as you not reusing the stock line going to the compressor nipple. Without it, your boost won't work, and there's no use trying to find any pills. YOu have to get the whole set new from the site listed above for $14.55.
Last edited by mitsuorder; Jun 1, 2006 at 04:05 PM.
Evolved Member
Joined: Sep 2005
Posts: 712
Likes: 0
From: City O Sin, MA...the not so sinish part though...
Originally Posted by feldguy
Old school, I meant to copy Warrtalon's post NOT yours bro.
I apologize, it was directed as HIM not you.
I apologize, it was directed as HIM not you.
. bottom line is this forum needs more love.



