EVO8: 310hp basically stock?
Evolving Member
Joined: Dec 2002
Posts: 119
Likes: 0
From: King of Prussia, PA
Originally posted by mobius97
I bet he is talking about the BCS restrictor...common free mod to get a few PSI out of the 1 and 2g's.
I bet he is talking about the BCS restrictor...common free mod to get a few PSI out of the 1 and 2g's.
Evolved Member
Joined: Nov 2002
Posts: 670
Likes: 0
From: Seattle
Originally posted by 2GTSiAWD
This isn't a DSM...Not all if any of those "free mods" work or are existent.
This isn't a DSM...Not all if any of those "free mods" work or are existent.
Evolved Member
Joined: Nov 2002
Posts: 670
Likes: 0
From: Seattle
Also to add.....I myself dont know much about the EVO, never owned one, familiar with the powerplant but not it's version. It is absolutely right that this is no DSM they are very diferent cars IMO. You are also right that just because something works on the "Twins" and its step brother the laser doesn't mean it will work on the EVO.....just to clear things up here, it will take time to figure out it's "tricks" as it did with the DSM's.
Evolving Member
Joined: Mar 2003
Posts: 110
Likes: 0
From: L.A
that's if you want a aftermarket engine 
Originally posted by TearItUpSports
An easier way would be to disconnect the line going to the wastegate actuator. If the wastegate doesn't open, you will get tons of boost.
WARNING: Do not actually do this!
An easier way would be to disconnect the line going to the wastegate actuator. If the wastegate doesn't open, you will get tons of boost.
WARNING: Do not actually do this!
Thread
Thread Starter
Forum
Replies
Last Post
nigletsyz
Vendor Service / Parts / Tuning Review
71
Nov 17, 2006 01:10 PM
