Go easy on me guys im a newb. I did search but couldnt come up with a direct answer for this.

I bought a 2003 TB Evo on saturday im pretty positive it has the OZ ralliart wing on it.

The wing with the middle pedastal. Is this middle pedestal drilled into the trunk? And will the Evo wing fit in its holes?

Thanks in advance!!

 

If the center support is drilled, then you'd have to fill those holes if you went back to the stock wing.

I don't know if they are or not, but I would imagine so.

 

From what I've heard, they are drilled.

 

I believe the mounting position is different. Somone else please confirm

 

can anyone confirm? thanks!

 

The side holes should be the same for both style wings: I have the Spoiler Depot replica of the Lancer wing and the side holes line up perfectly.

I do not have the center pillar, because at my request Spoiler Depot removed it and filled in the holes before shipping it to me. However, I believe that the center pillar is screwed to the decklid. A search should show you some pictures; way back when I found quite a few threads on this general topic.

You can probably tell whether the middle pillar is screwed down simply by examining the underside of your decklid.

 

The low wing was an option on the 03 EVO's

The center post is screwed down, and the mounting points for the end posts match up perfect.

Keith

 

Thanks so much, I guess i have to get the center holes filled or plugged when i get the new wing